Proteins from the Moringa oleifera plant – a tree native to India – can help effectively purify water in developing nations at a low cost, say scientists. Proteins from the Moringa oleifera plant – a tree native to India – can help effectively purify water in developing nations at a low cost, say scientists.

Healthy forests are critical to providing clean water. Deforestation in these watersheds, often caused by commodity and agricultural production, can contaminate water, fuel floods and drought, and lead to higher water treatment costs.

Deforestation likely contributes to increase the concentration of nitrates (nitrification) in the river water, and the increased hydrogen ions, released through increased nitrification, cause the water pH-value decrease (Lampert and Sommer 1997; Arceivala and Asolekar 2006).

Deforestation can have destructive effects on soils. Logging and small-scale removal of trees exposes soil to rain splash which loosens and dislodges soil particles, eroding soil and creating a more impermeable bare surface, which increases runoff.

Harvesting trees in the area beside a stream can affect water quality by reducing the streambank shading that regulates water temperature and by removing vegetation that stabilizes the streambanks.

This is perhaps the simplest, long-term solution to keeping water clean and clear. Floating plants, such as lilies and lotus, provide shade and reduce direct sunlight in the pond to control the growth of algae. Add submerged plants that release oxygen to the water, such as anacharis, hornwort and parrot’s feather.

Easy and Effective Ways to Purify Water

1. Boiling. The simplest method to purify water is to boil it for a good amount of time.
2. Water Purifier. Alt Attribute: A. O. Smith X4+ Water Purifier.
3. Reverse Osmosis.
4. Water Chlorination.
5. Distillation.
6. Iodine Addition.
7. Solar Purification.
8. Clay Vessel Filtration.

For spring and winter water-crowfoot (Ranunculus aquatilis) is to be recommended and in summer and autumn hornwort (Ceratophyllum demersum), pondweed or waterweed are to be preferred. Other well-known oxygenating plants are mare’s-tail (Hippuris vulgaris) and water violet (Hottonia palustris).

For starters, follow our 7 tips below to help keep your pond water clean!

1. Maintain a healthy fish population.
2. Don’t over-feed your fish.
3. Create a proper balance of plants.
4. Choose the right size pump for your pond.
5. Clean debris from pond before it has a chance to decay.
6. Choose proper filtration for your pond.

Green pond water is caused by tiny floating algae, which grow explosively. Additional effects are low CH value, high pH value and stagnation in growth of oxygen producing plants. Green pond water frequently occurs in newly built ponds containing water rich in food.

Clear Your Green Water Naturally

1. Step 1 – Clean Your Pond & Reduce Sludge. the amount of nutrients that feed algae can be significantly reduced by cleaning the muck and sludge from the bottom of your pond.
2. Step 2 – Reduce Fish Load.
3. Step 3 – Add More Plants.

Add Plants Floating plants will help provide shade and reduce sunlight to the pond to help control the growth of algae. Submerged plants release oxygen into the water and can be done so by attaching to a rock.

The quickest and easiest way to combat green water is to fit a pump, pond filter and Ultra Violet Clarifier. Pond water is pumped through the UVC where ultraviolet light damages and disrupts algae that pass through it. The algae cells are then caught in the mechanical section of the filter, and water quickly clears.

At a Glance: How to Keep Pond Water Clear

1. Understand that a little bit of algae or discoloration is normal.
2. Use beneficial bacteria to starve single-cell algae that turns water green.
3. Add a wide variety of aquatic plants to starve string algae.
4. Add a larger biofilter.
5. Don’t overfeed your fish.
6. Don’t overcrowd your fish.

How To Clear Pond Water Naturally. It sounds strange, but the answer to natural pond algae control is barley straw. Not only is barley straw a natural pond algae killer, but it won’t harm your fish or plants – and it’s cheap to buy too.

How can we stop it? Replacing depleted oxygen in your pond is a great way to reduce or even prevent algae build up. Simply add an aeration device, such as a Solar Oxygenator that will provide added oxygen to the water and help prevent algae build up.

Small garden or indoor fountains made from ceramic or plastic materials are easy to clean by adding bleach directly to the water. Add 1 teaspoon of bleach for every 20 gallons of water in the fountain. For small fountains less than 20 gallons in size, simply add five to 10 drops of bleach to the water.

Add Vinegar To Your Fountain To quickly clean and freshen your indoor water fountain, add a cup or two of filtered white apple cider vinegar. Vinegar exhibits antibacterial, antiviral and antiseptic properties, killing germs on contact. And best of all, it’s all-natural and doesn’t rely on the use of harsh chemicals.

You can use white vinegar and a bristled cleaning brush to scrub away tougher algae. The vinegar won’t damage the fountain and can remove stains and discoloration easily. Then using pipe cleaners to clear algae buildup out of the hole the water comes from.

Steps to keep your fountain water clean

1. What you may need before you start cleaning. Water.
2. 1) Dump Out the Old Water.
3. 2) Remove Debris.
4. 3) Scrub With a Bleach Solution.
5. 4) Rinse the Fountain.
6. 5) Allow the Birdbath to Dry Completely.
7. 6) Refill the fountain.
8. Done.

Never use chlorine or bleach as an algaecide or cleaner. Chlorine can damage your pump and fountain surfaces. First fill your fountain to the brim.

Fountain pumps aren’t designed to work with concentrated levels of chlorine, but if an algae bloom won’t die down, add 1/4 cup of chlorine bleach for every 5 gallons of water, and run the pump overnight so it circulates long enough to disinfect the entire system.

How do you clean a fountain? Mix one half cup of white vinegar to one gallon of warm water. Then, using a nylon scrubber, scrub down the entire fountain. If you have stubborn stains or hard water buildup you may need to use pure vinegar and a bit of elbow grease.

To clean the water feature, drain the water into the surrounding landscape. Then use a garden hose to rinse the rocks and gravel. Start at the top and work your way down to the bottom. Periodically turn the clean-out pump on to remove the dirty water.

To do this unplug your feature and drain all the water from it. Use a cleaning rag to wipe down the feature and depending on the material, use a soft bristle brush to scrub at any tougher algae.

The water may need topping up around once a week, depending on the weather, to keep it fully functional. If you keep fish in your pond or feature, add water to it from a mains supply, but do so in smaller amounts and more regularly.