The RPM 2 Coils from SMOK are replacement coils designed for the RPM 2 Pod featured on the RPM 2 Pod System. They come in two options, the stronger nic salt 0.6 Ohm coil for the Mouth to lung (MTL) feel or the regular vape juice 0.16 Ohm coil, for a more direct to lung (DTL) vape.

Likewise, if three or more resistors each with the same value are connected in parallel, then the equivalent resistance will be equal to R/n where R is the value of the resistor and n is the number of individual resistances in the combination. The equivalent resistance will therefore be: RT = R/n = 100/6 = 16.7Ω.

12 watts

Use the Mesh coils. They last a week and work great with nic salts. Use the 1.4 ohm standard coils. I just got a box of 1.4 ohm ceramic coils and have gone through two coils in three days.

If you are looking to extract intense flavor and thick vapor from a lower nicotine salt nic, the Smok RPM SC 1.0ohms is worth considering. SC stands for “single coil” and this is a robust and big coil. Vapers who prefer 50mg/ml nic salts might still be better off sticking with the higher resistance Nord coils.

The RPM 2 can be used with low-nicotine (under 10mg/1%) eliquids at your preferred wattage, up to the maximum 80W. If you use high-nicotine salt formulations, you should not use sub-ohm coils (coils with a resistance lower than 1.0 ohms) or wattage settings higher than 15W with your RPM 2 Kit.

The RPM Quartz 1.2 ohm coil is a pure flavor machine. Working at 12w, it is ideal for efficient nic salt vaping.

– SMOK Advanced Personal Vaporizers are not waterproof.

E-cigarette explosions occur when the lithium-ion battery inside a vape pen overheats, according to the Food and Drug Administration. Instead, the FDA suggests that companies should rework their batteries to make them less likely to overheat.

Whether you can vape or not while your device is charging depends on a few factors. Some vape kits have ‘pass-through technology’, which means the device can be used while it’s on charge. We do not recommend vaping while your device is charging if the kit uses external batteries (such as 18650 and 26650, for example).

one to two weeks