The “experts” say that a Ford 6.0 oil change is needed every 7,500 miles “under normal operating conditions” and 5,000 miles under “severe operating conditions.” And that should take about 6 months. And the extended life. heavy-duty oils say you can go 10,000 miles and more between oil changes.

1. Step 1 – Drain the fuel. Utilizing the large basin, drain the fuel via the water drain port, which is located under the vehicle on the driver’s side.
2. Step 2 – Remove the primary fuel filter cap.
3. Step 3 – Repeat Step 2 with the secondary fuel filter cap.
4. Step 4 – Test and restart.

Items you will need On a vehicle the side of the Ford E350 van, fuel delivery is vital to maintain a properly functioning engine. Unlike some vehicles where the fuel filter is located inside the gas tank, Ford placed the filter in a relatively easy location for replacement.

The 6.0L and 6.4L Power Stroke is equipped with two fuel filter elements. The larger, primary fuel filter is located inside of the left hand frame rail, below the driver’s side floorboard, with the fuel pump.

In my opinion, to make a 6.0 reliable I would:

1. Replace STC fitting and or updated bracket kit with the updated updated part ( 4C3Z-9B246-C ).
2. Replace the high pressure oil rail “dummy” plugs.
3. Install a coolant filter.
4. If ever at one point the heads need to come off, install an ARP head stud kit.

The 6.0L Power Stroke has a 6.875 gallon cooling system capacity.

Ford F-250 Super Duty Oil Change Cost Estimate. The average cost for a Ford F-250 Super Duty oil change is between $213 and $224. Labor costs are estimated between $42 and $53 while parts are priced at $172.

Capacity: 7 quarts (with filter)After refill check oil level.

6.7L Powerstroke Fluid/Oil Capacity Guide

Insert your clean funnel into the oil fill tube (where you removed the oil cap). Fill up the oil to 1 quart less than the recommended amount. Start the truck, let it run for about 10-15 seconds, then turn it off. Using the dipstick, check to see if you need to add oil.