At night, bright, distant light sources can produce the star effect. One bright, distant source of reflected light is the moon. The longer the exposure, the more star effect you will see, until the point at which the entire image is overexposed. The brighter the highlights in a photo, the more star effect.

9 Ways to Get Lens Flare in Photography

1. Shoot directly facing the bright light source.
2. Place your subject in front of the bright light source.
3. Shoot starbursts.
4. Play with your camera’s aperture settings.
5. Use camera filters and lenses.
6. Try experimenting with the sun when it’s partially obscured.
7. Experiment at night.

How to Create a Starburst Effect

1. Use a small aperture to create the starburst effect.
2. Reduce lens flare by partially blocking the sun.
3. If you can’t block the sun, try shooting with the sun low on the horizon.
4. Not all lens handle shooting into the sun equally.
5. Keep your lens clean and remove filters.
6. Don’t just shoot the sun.

To capture a sunstar, simply adjust your aperture to f/16 and shoot facing the sun. Be careful to not point directly at the sun through the viewfinder, especially when it is high in the sky as you are basically focusing the sun directly into your eye.

“Sunny 16” is the rule that says to set your aperture to 16 (using AV mode on your camera) in bright sun-lit situations. If you’re in full manual mode, remember ISO should be at 100. And for shutter speed, try 1/100 or 1/125. For faster shutter speeds, you may find it helpful to bump up the ISO to 200.

#1 Use a Small Aperture Light passing through a small aperture that is then spliced across the aperture blades in your lens is what creates a sunstar.

You can capture sun flares at any time of day, and with these easy tips, you’ll be out experimenting in no time.

1. Try various aperture settings.
2. Use Aperture Priority mode.
3. Partially hide the sun.
4. Move around and take lots of pictures.
5. Try using some filters.
6. Shoot during different times of day.
7. Divide the sun with your camera.

At night, bright, distant light sources can produce the star effect. One bright, distant source of reflected light is the moon. With a wide-angle lens, you can get some great star effects from Earth’s natural satellite, too. Exposure Your exposure affects the intensity of the star effect.

f/16
The rule states that on a sunny day, you should get correct exposure with camera settings of aperture f/16 and shutter speed as the inverse of the ISO (film speed). So if you have an ISO of 100, then the shutter speed should be 1/100 (or its closest conservative setting of 1/125s).

The biggest factor in the ability to create good sun stars is choosing the right aperture; generally speaking smaller is better here. This is where having a camera that lets you adjust the aperture value is vital, and something around the f/16 – f/22 mark is perfect for making large, crisp looking stars.

You’ll need the sun to be at least within a few degrees of the frame edges, which means that your subject will have to be very strongly backlit. Find the sun, and position your subject in front of it. However, make sure that the sun isn’t obscured by your subject; otherwise, you’ll end up with no flare at all. 2.

The main requirement to create flare is of course, the sun. If you’re shooting on an overcast day and there isn’t any sun poking through, you won’t be able to create a flare. 2. A low angle is best

Lens flare looks like a burst of light (sometimes geometric) that appears in your photos near light sources, like this: Now, lens flare is caused by stray light entering your lens and bouncing around, which means that it’s caused when you point your lens directly into the sun, or very nearly into the sun.

Cameras and lenses are designed to cut down on flare – so when it comes to sun flares, you have to be a rule-breaker right from the beginning. In this article, I’ll share 14 tips to help you get started photographing sun flares!