Commonly abbreviated as D, depth is a measurement of how far back a three-dimensional object is. For example, measurements of an object, such as a computer monitor, are commonly measured as (D x W x H), short for Depth by Width by Height. In the illustration, the Z-axis is the depth.
Q. What is the length in a rectangle?
The length of a rectangle is the longest side, whereas the width is the shortest side. The width of a rectangle is sometimes referred to as the breadth (b).
Table of Contents
- Q. What is the length in a rectangle?
- Q. How do you work out area and depth?
- Q. How do I calculate the depth of my water tank?
- Q. What are the dimensions of a 10000 Litre water tank?
- Q. What is depth and height?
- Q. What is MD in drilling?
- Q. What unit equal to 6 feet is a measure of water depth?
- Q. How can you use a sensor to measure depth?
- Q. What is 6 foot water?
- Q. What is the unit of measure for water?
Q. How do you work out area and depth?
The area of a square or rectangular garden is easy to calculate. Simply multiply the length by the width by the depth or use our simple volume calculator. Circular areas are also easy to calculate. Simply multiply 3.1415 (π) by the radius, by the radius again, by the depth or use our simple volume calculator.
Q. How do I calculate the depth of my water tank?
Measure the length, width, and depth of the interior of the tank in feet and inches. Convert the dimensions to decimal feet by dividing the number of inches by twelve and adding to the number of feet. For example, 7 feet 9 inches is 7.75 feet. Calculate the tank’s volume in cubic feet.
Q. What are the dimensions of a 10000 Litre water tank?
How Big is a 10000 Litre Water Tank? This 10000 litre domed tall water tank has a diameter of 2.57m, an inlet height of 2.24m, and a total height of 2.44m.
Q. What is depth and height?
Height vs Depth Height is a measurement of the vertical magnitude of the object. Depth is also a measurement of the vertical magnitude of an object. These two terms may look like representing the same quantity.
Q. What is MD in drilling?
In the oil industry measured depth (commonly referred to as MD, or just the depth), is the length of the borehole. In conventional vertical wells, this coincides with the true vertical depth, but in directional or horizontal wells, especially those using extended reach drilling, the two can deviate greatly.
Q. What unit equal to 6 feet is a measure of water depth?
fathom
Q. How can you use a sensor to measure depth?
The only way you could use our sensors to measure the depth of a lake would be to mount it a known height above the lake bed and subtract the reported distance to the water (the sensors reading) from the known distance to the lake bed. (Same concept as measuring levels/depth in a tank or container).
Q. What is 6 foot water?
| six feet of water (6) | |
|---|---|
| Six feet of water | |
| FATHOM | |
| Six feet of water (abbr) (3) | |
| F T H | |
Q. What is the unit of measure for water?
Basic units of water measurement For water that is in motion, cubic feet per second (cfs) is the unit of measure. For water that is stored or impounded, the acre-foot (af) is how water is measured.
