Trip Hazard. Definition: Hazard caused by an abrupt change in vertical elevation or horizontal separation on any walking.

Isolation Prevent access to high risk areas, for example cordon off wet floor areas while cleaning is in progress.

Indoor control measures can help reduce the incidence of slips and falls:

1. Use moisture-absorbent mats with beveled edges in entrance areas.
2. Display “Wet Floor” signs as needed.
3. Use anti-skid adhesive tape in troublesome areas.
4. Clean up spills immediately.
5. Use proper area rugs or mats for food preparation areas.

Each year slips, trips and falls result in thousands of preventable injuries. The most common ones are musculoskeletal injuries, cuts, bruises, fractures and dislocations, but more serious injuries can also happen.

This can be caused by dehydration, ageing circulation, medical conditions such as Parkinson’s disease and heart conditions and some medications used to treat high blood pressure. inner ear problems – such as labyrinthitis or benign paroxysmal positional vertigo (BPPV) problems with your heart rate or rhythm.

The most common injuries from these types of accidents, unsurprisingly, are fractures and dislocated joints. These are most commonly to the ankle or wrist, but fractures to fingers are also common. Shoulder dislocation and knee injury can also commonly occur.

What are the main causes of slips, trips, and falls?

• Uneven floor surfaces.
• Unsuitable floor coverings.
• Wet/slippery floors.
• Changes in levels.
• Trailing cables.
• Poor lighting.
• Poor housekeeping.

1. Common slip, trip and fall hazards

• poor lighting.
• trailing cables.
• unsuitable floor coverings.
• uneven or damaged floor surfaces.
• contaminated floor surfaces, for example liquid or grease​
• poor housekeeping, for example tripping or falling over something left in a walk way.

It’s not just minor injuries that result from slips, trips and falls….Trip hazards can happen in any type of work environment, and it’s not just cables you need to look out for.

• Obstacles.
• Loose flooring.
• Uneven flooring.
• Trailing cables.
• Obstructions.
• Poor housekeeping.
• Bad lighting.

Slip and fall accidents cause many types of injuries including:

• Broken bones.
• Sprained ankles or wrists.
• Knee damage.
• Shoulder dislocations or muscle strains.
• Spine and nerve damage.
• Traumatic brain injury.
• Cuts and bruises.

The average slip and fall settlement is between $15,000 and $45,000. Whether your case falls within the average range depends on several factors. If your injuries are relatively minor, your case may be below average.

No matter what type of personal injury case you may have, it will always rely on your ability to prove negligence. In a slip and fall accident claim, you also have to prove all the other elements of a negligence claim. That worst-case scenario is all too common, which is why it is so hard to win slip and fall cases.

By far the most common cause of slip and fall accidents globally is due to wet and uneven surfaces….1. Wet and Uneven Surfaces

• Loose floorboards.
• Cluttered floors.
• Parking lot potholes.
• Defective sidewalks.
• Torn carpeting.
• Poorly constructed staircases.
• Recently waxed or mopped floors.
• Moisture collection.

37% of all reported workplace injuries were as a result of a slip, trip or fall, with 28% of all fatalities in the workplace being caused by a slip, trip or fall. On average approximately 50 people die each year from a slip, trip or fall and a great many more are injured – some critically.

According to the HSE’s report on non-fatal injuries during 2018/19, the most common causes of accidents at work are:

• Slips, trips or falls on the same level (29%)
• Handling, lifting or carrying (20%)
• Being struck by moving object (10%)
• Acts of violence (8%)
• Falls from height (8%)

The insurer’s report also identifies the top causes of serious workplace injuries by key industries….Top 10 Causes of Most Serious Workplace Injuries.

The top three leading causes of work-related injuries – overexertion and bodily reaction, slips, trips and falls, and contact with objects and equipment – account for more than 84% of all nonfatal injuries involving days away from work.

Getting On and Off Equipment or Machines. According to data maintained by OSHA, the most common cause of worksite injuries associated with equipment and machines is getting on and off of equipment and machines. A key to ensuring safety getting on and off equipment and machines is to check boots and gloves.

The injuries that are most frequently seen in healthcare employees include sprains and strains, slipped discs, bloodborne infectious diseases, infections, and broken bones.

Sprains

Top 5 most common workplace injuries and how to avoid them.

1. Trips, Slips And Falls. Slips, trips and falls account for one third of all personal injuries in the workplace, and they’re a top cause of all workers’ compensation claims.
2. Being Struck By Or Caught In Moving Machinery.
3. Vehicle Related Accidents.
4. Fire And Explosions.
5. Repetitive Stress and Overexertion Injuries.

Within the imaging environment, radiation exposure, needle sticks, and ergonomic injuries are the commonest sources of concern for injury, and the vast majority of radiology departments have well-defined policies for minimizing or prevent- ing their occurrence.