Inches to MM Conversion
Q. What size should a rain gauge be?
20 inch
Table of Contents
- Q. What size should a rain gauge be?
- Q. How many inches of rain does it take to fill a 5 gallon bucket?
- Q. What is smaller than a 1/4 inch?
- Q. How long is 5 mm on a ruler?
- Q. What is 10mm in standard?
- Q. Is M10 the same as 10mm?
- Q. What is a 10mm wrench in inches?
- Q. What is a 36 mm in standard size?
- Q. What is the equivalent of a 10mm drill bit?
- Q. What is the next size up from 1/2 inch drill bit?
- Q. What size is a #1 drill bit?
Q. How many inches of rain does it take to fill a 5 gallon bucket?
2 inches
inch | 1 | 6 |
---|---|---|
mm | 25.4 | 152.4 |
Q. What is smaller than a 1/4 inch?
The lines at each rank get shorter, ie: 1/4 is shorter than 1/2; 1/8 is shorter than 1/4; and 1/16 is shorter than 1/8. Fractions have two parts, the numerator and the denominator.
Q. How long is 5 mm on a ruler?
5 mm (0.5 or 1/2 cm) 6 mm (0.6 cm)
Q. What is 10mm in standard?
MM | Approximate Size In Inches | Exact Size In Inches |
---|---|---|
9mm | Just short of 3/8 Inch | 0.35433 Inches |
10mm | Little over 3/8 Inch | 0.39370 Inches |
11mm | 7/16 Inch | 0.43307 Inches |
12mm | Just short of 1/2 Inch | 0.47244 Inches |
Q. Is M10 the same as 10mm?
Those are metric screw dimensions. M10 means a 10 millimeter outer diameter for the bolt or whatever piece it is; M12 means 12 millimeters. The part after the ‘x’ is the pitch — how many mm a thread is wide.
Q. What is a 10mm wrench in inches?
Metric / Standard Wrench Conversion Chart
Bolt Diameter | Metric | Standard |
---|---|---|
1/8″ | 8mm | 5/16″ |
3/16″ | 10mm | 3/8″ |
1/4″ | 11mm | 7/16″ |
5/16″ | 13mm | 1/2″ |
Q. What is a 36 mm in standard size?
Wrench Size And Conversion Table
Inches | Millimeters | Spanner |
---|---|---|
1.417 | 36mm | 36mm |
1.418 | 1 7/16 AF | |
1.480 | 7/8 Wworth; 1in BSF | |
1.500 | 1 1/2 AF |
Q. What is the equivalent of a 10mm drill bit?
Metric Tap and Drill Bit Size Table
Tap | Metric Drill | US Drill |
---|---|---|
10mm x 1.25 | 8.9mm | 11/32″ |
10mm x 1.0 | 9.1mm | – |
12mm x 1.75 | 10.5mm | – |
12mm x 1.5 | 10.7mm | 27/64″ |
Q. What is the next size up from 1/2 inch drill bit?
Drill Bit Hole Diameters | ||
---|---|---|
Metric Size | Fractional Size | |
21 mm | .8268 | 15/32 |
22 mm | .8661 | 31/64 |
23 mm | .9055 | 1/2 |
Q. What size is a #1 drill bit?
Downloadable versions:
Drill size | Diameter (in) | Diameter (mm) |
---|---|---|
1 mm | 0.0394 | 1.0000 |
#60 | 0.0400 | 1.0160 |
#59 | 0.0410 | 1.0414 |
#58 | 0.0420 | 1.0668 |
Randomly suggested related videos: