The road will get narrower. A solid line along the side of the road indicates where its edge is, marking the boundary between the travel lane and the shoulder. If the edge line angles toward the center of the road, this means that the road is narrower ahead.
Q. How many warning signs does a railroad crossing have?
At public highway-rail crossings, there are two basic types of warnings: Passive signs. Active warning signs.
Table of Contents
- Q. How many warning signs does a railroad crossing have?
- Q. How far in front of a railroad track should railroad warning signs be placed?
- Q. When you prepare for a right turn should you remain as near the center of the lane as possible?
- Q. What is the normal shape of a warning sign?
- Q. When preparing for a right turn you should stay as close to the center point of your lane as possible?
- Q. When you are getting ready to turn you must signal for at least?
- Q. When making au turn who has the right of way?
- Q. When you get ready to leave an expressway you should?
- Q. When preparing to leave a parallel parking space you should?
- Q. When merging onto a freeway it is usually best to?
- Q. What is the most common mistakes drivers make in entering a freeway?
- Q. Which of the following is the safest technique to use when entering a freeway?
- Q. When you are on the freeway in the right lane allow room for vehicles merging onto the freeway by?
- Q. What is the proper way to merge onto a highway?
- Q. What is rule for merging traffic?
- Q. Why you should merge last minute?
- Q. When two lanes merge into one who should give way?
- Q. When two lanes merge who has the right away?
Q. How far in front of a railroad track should railroad warning signs be placed?
100 feet
Q. When you prepare for a right turn should you remain as near the center of the lane as possible?
As you prepare to turn, reduce speed and stay as far to the right as possible. Begin the turn in the lane nearest to the right-hand curb and end the turn in the lane nearest the right-hand curb. Give turn signal. Yield to pedestrians who may be crossing your path.
Q. What is the normal shape of a warning sign?
diamond
Q. When preparing for a right turn you should stay as close to the center point of your lane as possible?
Cards
| Term 1. A regulation sign is usually what shape? | Definition White rectangles with black lettering or symbols. |
|---|---|
| Term 20. How far before a turn must you signal? | Definition 100 feet. |
| Term 21. When preparing for a right turn, should you stay as close to the center of the lane as possible? | Definition True |
Q. When you are getting ready to turn you must signal for at least?
You can signal with your hand and arm or with your vehicle’s turn signals and brake lights. You should signal at least 100 feet before you turn so the other drivers can be ready. Check your vehicle’s turn signals often to ensure they are working properly.
Q. When making au turn who has the right of way?
If you are at an intersection that allows a U-turn and you have the green arrow light, then you are the one with the legal right-of-way. On the other hand, a driver making a U-turn on a red light must yield to oncoming traffic. Both drivers, however, should stay in the closest lane and not cut across traffic.
Q. When you get ready to leave an expressway you should?
Avoid using your turn signal. When exiting an expressway, it is important to be alert to other traffic moving nearby. Be sure to look at the new posted speed limit and check your speedometer. It is unlikely that you will be exiting onto a road with a speed limit as high as the one found on the expressway.
Q. When preparing to leave a parallel parking space you should?
Keep at least two feet away from this vehicle (see figure). Check to make sure the way is clear behind you, and shift into reverse. Look over your shoulder and back slowly as you turn your wheel toward the curb. Back up slowly so that the front of the vehicle is even with the front door of the vehicle beside you.
Q. When merging onto a freeway it is usually best to?
When merging onto a freeway, it is usually best to:
- Proceed slowly while waiting for an opening.
- Accelerate to a speed that is faster than the speed of traffic.
- Turn on your hazard lights until safely on the freeway.
- Accelerate to the speed of freeway traffic.
Q. What is the most common mistakes drivers make in entering a freeway?
Failing to indicate when merging, merging too soon and driving too slowly are among the most common errors. Merging too soon. Merging onto the highway near the start of the acceleration lane or through the gore area is illegal.
Q. Which of the following is the safest technique to use when entering a freeway?
Always arrive at a full stop at the ramp signal until it turns green. 5. Accelerate to a safe speed close to the flow of freeway traffic. When you are on the entrance ramp, be prepared to accelerate to a safe speed close to the flow of freeway traffic and begin checking for the opening.
Q. When you are on the freeway in the right lane allow room for vehicles merging onto the freeway by?
D. Honking your horn to make them aware of your presence. Most of the time, you should drive in the right or center lane of the freeway. However, when driving in the right lane while another vehicle is attempting to enter the freeway from a nearby ramp, safely merge into the next lane to allow them access.
Q. What is the proper way to merge onto a highway?
How to Merge on a Highway Safely and Smoothly
- Step 1: Get up to speed. The first (and most important) thing you need to do is to use the merging area or ramp to get up to speed.
- Step 2: Check your mirrors.
- Step 3: Adjust your following distance.
Q. What is rule for merging traffic?
If you have to cross a white line (i.e a lane change), give way to all traffic in the lane you’re about to enter. If the white line ends before the lanes merge (i.e a zip merge), give way to any car that’s in front of you. If you’re about to enter a freeway, wait for a safe gap.
Q. Why you should merge last minute?
The last-minute system, dubbed the “zipper merge,” suggests that all drivers wait until they’re almost at the fork in the road or start of the closed lane to merge over. It also makes the road safer.
Q. When two lanes merge into one who should give way?
Where two lanes merge into one, the vehicle in front has the right of way. If there are dual lanes, and the lane you are in ends, give way to the vehicles in the lane you are moving into. Always use your indicator to signal your intentions to other drivers when merging.
Q. When two lanes merge who has the right away?
When two lanes merge into one, you might be left wondering who has the right of way. The car in the through lane, or the lane that is not ending, has right of way.
