Apple will reportedly stop its support for the iPad 2 on April 30. After this month, iPad 2 units will not be eligible for official services anymore. The device had a 9.7-inch display with 132 PPI, 0.7-megapixel rear camera, and A5 chip which are leagues behind Apple’s current devices today.

AirPods work with all ‌iPhone‌, ‌iPad‌, and iPod touch models that run iOS 10 or later. This includes the ‌iPhone‌ 5 and newer, the iPad mini 2 and newer, the fourth-generation ‌iPad‌ and newer, the iPad Air models, all iPad Pro models, and the 6th-generation ‌iPod touch‌.

Here’s how:

1. Connect the first pair of AirPods to your iPad.
2. Open Control Center on your iPad by swiping down from the top right corner of the Home Screen.
3. To connect the second pair of Airpods, hold the case near your iPad and open the lid.
4. When your second pair of AirPods appear on the screen, tap Share Audio.

Check for debris in the headphone port on your iPhone, iPad or iPod touch. Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Firmly plug your headphones back in. If your iOS device has a case, remove the case to get a firm connection.

Our simple step-by-step guide will help.

1. Pick up your iPad and go to Settings à General à Bluetooth.
2. Tap to turn on your iPad’s Bluetooth.
3. Place your Bluetooth headphones into “Pairing Mode.”
4. When you see the headphones name appear in the available device’s list, tap it to pair and connect.

How to Adjust the Audio on iPad

• Tap the Settings icon on the Home screen. A list of settings appears on the left.
• In the General settings, tap Sounds. The Sounds options appear on the right.
• Tap and drag the slider to the right to increase the volume, or to the left to lower it.
• Tap the Home button to close Settings.

The iPhone won’t record through its headphone jack (or headphone jack dongle) unless it thinks it’s connected to a headset. That means you need a special cable. If you ever bought some headphones that have a detachable cable with an inline remote and mic, then you’re in luck.

Repair Cost of Other Common iPad Issues Faulty volume buttons usually come in at under $100 total, which is a comparatively inexpensive fix when you’re worried about replacing the entire device. Camera malfunctions are also frustrating for iPad users.

Go to Settings > Sounds (or Settings > Sounds & Haptics), and drag the Ringer and Alerts slider back and forth a few times. If you don’t hear any sound, or if your speaker button on the Ringer and Alerts slider is dimmed, your speaker might need service. Contact Apple Support for iPhone, iPad, or iPod touch.

To do so:

1. 1) If your iPad has a mute switch, make sure it is turned off.
2. 2) Press the volume up button to adjust the volume. Make sure the volume is high enough so you can hear the sound.
3. 3) On your iPad, tap Settings and then Bluetooth.
4. 1) Tap Settings, then go to General > Reset.
5. 2) Tap Reset Network Settings.

Check the “Mute toggle” on the right side of the iPad, just above the volume rocker. If you see the color orange, the device is muted. Open the Control Center by swiping down from the top right corner. Check the Volume (speaker) control – a slash through the icon will indicate sound is muted.

Slide your finger downwards starting from the top right side of the screen. Press the sound mode icon to turn silent mode on or off.

Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds. If you choose Lock Screen Rotation, then the switch locks the screen.

Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.

1. Turn silent mode on or off

1. Slide your finger downwards starting from the top right side of the screen.
2. Press the sound mode icon to turn silent mode on or off.
3. Press the Home key to return to the home screen.

Answer: A: You can swipe up from the bottom of the screen to bring up the control center (sipe up twice if running iOs 11), and then tap on the Bell icon to mute all sounds. Alternatively holding down the Volume down button on the side if the iPad for a couple seconds will also mute the iPad.

How to Toggle ON Silent Mode on iPad or iPad Pro

1. Swipe down from the top right corner of iPad screen to access Control Center in modern iOS *
2. Look for and tap on the bell icon to mute the iPad.
3. The iPad is now in “Silent Mode” and all audio is mute.

Set options for alert tones and ringtones, and ringer and alert volumes.

• Go to Settings > Sounds.
• Drag the slider to set the volume for the ringer and alerts.
• Tap Ringtone and other options to select sounds for the ringtone and alert tones.

How to Unmute the Sound on an iPad via Settings App

1. Go to Settings > General > Use Side Switch To.
2. Change this setting from Mute to Lock Rotation.
3. When you have the side switch set to lock screen rotation, your Mute Button is in the Control Center.

If Your iPad Doesn’t Have a Side Switch

1. Go to the upper-right corner of the screen and swipe down to open the Control Center.
2. Tap the Rotation Lock icon to enable or disable the orientation lock feature.
3. Tap the Silent Mode button to mute the iPad.