A fast paced game like CS: GO running at 400 FPS on a 60 Hz monitor, with input latency at best around 2.5ms, will feel significantly more responsive to your mouse movements than if you were running the same game at 60 FPS with 16.7ms of latency (or more).

150 feet

A hit from 500+ fps gun can easily penetrate your skin….500+fps.

It’s not very painful though and usually goes away in a few seconds. It’s equivalent in my opinion to a wasp sting that goes away quickly. The 450FPS gun at 30 feet will probably sting quite a bit.

If your airsoft gun is shooting 400 FPS with a . 20g BB and you switch to a . 45g BB, your gun will be shooting 270 FPS. There’s a big difference in FPS, but the kinetic energy it carries on flight will be the same, 1.52 Joules, regardless of what BB weight you use.

This is due to the fact that a joule is an extremely small amount of energy. To put how small a joule is into perspective, a liter of gasoline has 31,536,000 joules of energy in it. A kilowatt-hour is equal to 3,600,000 joules.

One joule can also be defined as the following:

• The work required to move an electric charge of one coulomb through an electrical potential difference of one volt, or one coulomb-volt (C⋅V).
• The work required to produce one watt of power for one second, or one watt-second (W⋅s) (compare kilowatt-hour – 3.6 megajoules).

Greater than 10 Joules is considered hazardous. Greater than 50 Joules is a lethal level.

Answer. Explanation: A watt-second (symbol W s or W. s) is a derived unit of energy equivalent to the joule.

The joule ( jawl, jool; symbol: J) is a derived unit of energy in the International System of Units. It is equal to the energy transferred to (or work done on) an object when a force of one newton acts on that object in the direction of the force’s motion through a distance of one metre (1 newton metre or N⋅m).

Joule, unit of work or energy in the International System of Units (SI); it is equal to the work done by a force of one newton acting through one metre. Named in honour of the English physicist James Prescott Joule, it equals 107 ergs, or approximately 0.7377 foot-pounds.

Newton, absolute unit of force in the International System of Units (SI units), abbreviated N. It is defined as that force necessary to provide a mass of one kilogram with an acceleration of one metre per second per second.

Force is defined as the rate of change of momentum. For an unchanging mass, this is equivalent to mass x acceleration. So, 1 N = 1 kg m s-2, or 1 kg m/s2.

9.80665 N

The newton (symbol: N) is the SI unit of force. It is named after Sir Isaac Newton because of his work on classical mechanics. A newton is how much force is required to make a mass of one kilogram accelerate at a rate of one metre per second squared.

“A Newton is about ¼ pound, the weight of a stick of margarine.” Weight is the downward force of gravity exerted on an object by the planet it is located on.

When two forces acting on an object are equal in size but act in opposite directions, we say that they are balanced forces . a moving object continues to move at the same speed and in the same direction. …

Measuring Forces We measure forces using a unit called Newtons. They get this name from one of the most famous scientists of all time: Isaac Newton. He was the first person to describe the force that we know as gravity. A Newton can be described in another way, measured in kg * (m/sec2).

gravity, also called gravitation, in mechanics, the universal force of attraction acting between all matter. On Earth all bodies have a weight, or downward force of gravity, proportional to their mass, which Earth’s mass exerts on them.

The cgs unit for force comes from the same equation and is called the dyne, or dyn. 1 dyn = 1 g·cm/s2.

second

unit centipoise

The SI unit of dynamic viscosity is the newton-second per square meter (N·s/m2), also frequently expressed in the equivalent forms pascal-second (Pa·s) and kilogram per meter per second (kg·m−1·s−1).

One of the most viscous liquids known is pitch, also known as bitumen, asphalt, or tar. Demonstrating its flow and measuring its viscosity is the subject of the longest continuously running scientific experiment, begun in 1927 at the University of Queensland in Australia.

0.1 Pa

The unit of viscosity is newton-second per square metre, which is usually expressed as pascal-second in SI units.

There are several formulas and equations to calculate viscosity, the most common of which is Viscosity = (2 x (ball density – liquid density) x g x a^2) ÷ (9 x v), where g = acceleration due to gravity = 9.8 m/s^2, a = radius of ball bearing, and v = velocity of ball bearing through liquid.

Dynamic viscosity: The SI physical unit of dynamic viscosity (μ) is the Pascal-second (Pa s), which is identical to 1 kg m−1 s−1. The physical unit for dynamic viscosity in the centimeter gram second system of units (cgs) is the poise (P), named after Jean Poiseuille.