6060 aluminum is a medium strength alloy more closely related to 6063 than to 6061 but will have more magnesium than 6063….Applications.

The main difference between 6060 and 6063 is that 6063 has a slightly higher magnesium content. It can be formed by extrusion, forging or rolling, but as a wrought alloy it is not used in casting. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength but lower ductility.

6060 6060 alloy is one of the most common alloys of the 6000 series. It is a heat treatable alloy with very good corrosion resistance and weldability. It is commonly used in window and door frames in residential and commercial applications.

6060-T66 aluminum is 6060 aluminum in the T66 temper. To achieve this temper, the metal is solution heat-treated and artificially aged, with additional process control to yield more favourable properties.

EOS Aluminium AlSi10Mg is a widely used alloy that combines light weight and good mechanical properties. Different heat treatments can be applied to modify properties for example to increase ductility and conductivity. The material has good thermal and electrical conductivity especially after heat treatment.

6060 aluminum is a medium strength alloy more closely related to 6063 than to 6061 but will have more magnesium than 6063. This alloy is mainly found in Europe with metric sizes and is commonly heat treated to a temper with higher strength but low ductility. 6060 alloy is very good for anodizing.

Aluminium alloy 6060 is typical of a family of Al-Mg-Si extrusion alloys, which are considered weldable only when using an appropriate filler alloy such as 4043 (Al-5 Si) or 5356 (Al-5 Mg).

AlSi10Mg is an aluminum alloy that boasts great mechanical and thermal properties while offering lightweight and flexible post-processing options. Often used in automotive and aerospace, this metal material is ideal for housings, ductwork, production tools, and engine parts.

Until now, the colour grey-brown has dominated metal 3D printing, because components made of the primarily related standard alloy AlSi10Mg cannot be anodised well due to its silicon content of 9 to 11 percent. …

Yes. According to the Aluminum Extruder’s Council, alloys 6061, 6105 and 6063 are best suited to painted applications. Since painting is obviously quite different from anodizing, keep your metal supplier informed of your finishing requirements.