The speed of the shuttle was Kay’s most brilliant innovation in that he replaced the handling of the shuttle with a sling-shot mechanism which enabled the weaver to hold a handle and flick the shuttle from one side to another at speeds estimated up to 30 mph.

Terms in this set (11) Flying shuttle: John Kay’s invention allowed the shuttle, containing the thread, to be shot backwards and forwards across a much wider bed. The flying shuttle also allowed the thread to be woven at a faster rate, thus enabling the process of weaving to become faster.

The flying shuttle was one of the key developments in the industrialization of weaving during the early Industrial Revolution. It allowed a single weaver to weave much wider fabrics, and it could be mechanized, allowing for automatic machine looms.

It is a mechanical device used for weaving moved by means of ropes and pullies. It places the horizontal threads (called the weft) into the verticle ? threads (called the warp). The invention of the fly shuttle made it possible for weavers to operate large looms and weave wide pieces of cloth.

Flying shuttle, Machine that represented an important step toward automatic weaving. It was invented by John Kay in 1733. In previous looms, the shuttle was thrown, or passed, through the threads by hand, and wide fabrics required two weavers seated side by side passing the shuttle between them.

In 1738 Kay went to Leeds, where his problem had become royalty collection (the annual licence fee was 15 Shillings per shuttle). He continued to invent, patenting some machines in the same year, though these were not taken up industrially. Click to see full answer.

John Kay

The flying shuttle was an improvement to the loom that enabled weavers to work faster. The original tool contained a bobbin onto which the weft (crossways) yarn was wound. It was normally pushed from one side of the warp (the series of yarns that extended lengthways in a loom) to the other side by hand.

Shuttles are thrown or passed back and forth through the shed, between the yarn threads of the warp in order to weave in the weft. This discussion on What was the fly shuttle used for-a)Washingb)Weavingc)Drying d)Sowing Correct answer is ‘B’.

The invention of the spinning jenny in 1764 sparked a movement that would change the lives of people worldwide. The economy had been stagnating for centuries. Eighty percent of the world’s population was working in the countryside; many were malnourished, with an average life expectancy of 28 years.

Simply put, the spinning jenny was a machine that used a large wheel to spin many spindles of thread at once. The invention increased the production ability of textile manufactures and was particularly important for cotton. The spinning mule essentially allowed the fast production of yarn using a spinning machine.

The main advantage of Hargreaves’ Spinning Jenny was that it could spin several threads at once. One of the disadvantages of Hargreaves’ machine was that it was more expensive than the traditional spinning-wheel. In the long-term the Spinning-Jenny also resulted in some spinners becoming unemployed.

The spinning jenny allowed more threads and yarns to be produced by fewer spinners. The early spinning jenny also produced a weaker thread than could be produced by hand so there was a decrease in quality until improvements were made to the machines and a dependable power source became available.

The spinning jenny is not used today anymore since technology has been advanced. There are machines that make clothing, which have replaced the spinning jenny. The spinning jenny had 8 spindles on its frame which spun the thread. So by turning the wheel, you could spin 8 threads.

The spinning jenny was superseded by the spinning mule. The jenny was adapted for the process of slubbing, being the basis of the Slubbing Billy.

cotton weaver

The machine used eight spindles onto which the thread was spun from a corresponding set of rovings. By turning a single wheel, the operator could now spin eight threads at once. It is estimated that by the time James Hargreaves died in 1778, over 20,000 Spinning-Jenny machines were being used in Britain.

Hint:The spinning jenny was a multi spindle spinning frame that was developed in 1764, was a major development in the textile industry during the industrial revolution. It was used for spinning wool or cotton. It reduced the amount of work needed to produce cloth.

The spinning frame is an Industrial Revolution invention for spinning thread or yarn from fibres such as wool or cotton in a mechanized way.

The Zareba Spinning Jenny Fence Wire De-Reeler makes payout of coiled high tensile fence wire easy. It can be used for both high tensile and for other fence systems. Made with heavy duty construction, it holds up to 4,000-feet of high tensile wire.

12.5-gauge

40 years

Therefore, 16 gauge wire is thicker than 19 gauge wire and so it is stronger, provided each sample of wire is made from the same material and is constructed in the same manner.

The individual spiral wires that are woven together to form the fabric are comprised of steel wire, gauge is the diameter of that wire. The higher the gauge number the smaller (thinner) the wire diameter. 192″), 9 gauge (. 148″), 11 gauge (.

11-gauge steel is 1.45 times stronger than 12-gauge steel. 10-gauge steel is 1.42 times stronger than 11-gauge steel.

Thus, a 10 gauge steel sheet which has a thickness of 0.1345 inches will weigh 41.82*0.1345 = 5.625 pounds per square foot….How strong is 10 gauge steel?

16ga steel is . 065” inches thick, that is about 1/16th of an inch thick. 14 gauge in comparison is . 083 inches thick which doesn’t sound like much except it is almost 30% thicker (27.6% to be exact).