Inside the Neon Cave, players can fuse spirits of their pets by placing four full-grown pets of the same type, onto the four glowing circles around the edge of the platform, causing them to coalesce and become one pet. The new pet will have glowing ‘neon’ in different spots of their body.

Neon tubes can be fabricated in curving artistic shapes, to form letters or pictures. They are mainly used to make dramatic, multicolored glowing signage for advertising, called neon signs, which were popular from the 1920s to 1960s and again in the 1980s.

Broken neon lights can be disposed of like any other broken glass. Please take caution and be careful to not touch or handle broken glass pieces. Due to the nature of thin glass, if your neon light breaks it will break into tiny pieces of glass. Using a broom to sweep the broken glass is the preferred method.

about 8 to 15 years

A red neon light’s typical energy consumption is at 3 1/2 to 4 watts per foot. If you continuously run a sign for 12 hours, a foot of red neon sign would typically use about 15.33 to 17.52-kilowatt-hours of electricity per year while a fluorescent model will take up 50 percent more than that.

A neon light contains a tiny amount of neon gas under low pressure. Electricity provides energy to strip electrons away from neon atoms, ionizing them. Ions are attracted to terminals of the lamp, completing the electric circuit. Light is produced when neon atoms gain enough energy to become excited.

Neon produces a reddish-orange color. Argon produces a faint purple. Krypton produces a ghostly white. Xenon produces a blue glow.

Edgelit is a clear acrylic that when lit from the side, diffuses and allows a uniform illumination of its edges and laser engravings. Edgelit offers all the impact strength and weather resistance of cast acrylic.

Acrylic can be lit several different ways, but the de facto standard nowadays is with embedded LED work. Subtle and diffuse backlighting and clear, visible point lighting from coloured LEDs offer a nice alternative, and both of these really shine when held fast in acrylic panels.

How to backlit an acrylic print in 5 steps

1. Attach mountings to the wall. Transfer spacing to the wall and attach the back part of the hanging kit.
2. Attach LEDs. Wrap the LED strip light around the wall mountings.
3. Attach mountings to the print.
4. Hang the print.
5. Done.

Since the acrylic refracts light, our acrylic prints can appear to be backlit if you have good overhead art lighting and metallic paper.