The average cost to renovate a whole 1,200 sq. ft. house is $18,000 to $72,000, while remodeling a 2,000 sq.

A typical price for a business renovation is around $100 to $200 per square foot. If this is an amount that you’re prepared to spend, then a commercial remodel may be a realistic expense for your business.

If you want cheaper, remodel. Even a wide-ranging whole-house remodel will still be cheaper than tearing down and building anew. According to Roger Greenwald, RA, AIA, “the cost of tearing down and rebuilding will be about 20 percent higher than engaging in an extensive whole-house remodel.

Gut Renovation Depending on the square footage, the average cost to gut and remodel a house can be anywhere between $100,000 – $200,000⁴. Gut renovation cost per square foot ranges between $60 – $150 and includes new plumbing, appliances, structural improvements, a new roof and an HVAC.

According to the Housing Industry Association, it takes between 13 and 25 days (on average) to complete a full bathroom installation as part of a renovation.

Small bathroom remodels cost $1,500 to $15,000. Simple cosmetic upgrades like paint, fixtures and lights run from $1,000 to $3,500. A complete tear out and replacement runs $5,000 to $15,000. Small bathrooms are often less expensive to remodel than larger ones because they have less square footage.

The average cost of a bathroom remodeling project is approximately $10,000, although this includes minor, partial, and small bathroom remodeling costs. A comprehensive bathroom remodel is likely to cost $15,000 or more; a large master bath remodel can easily go over $50,000.

The most popular choice for bathrooms is tile. Specifically, ceramic and porcelain tiles are great options for bathrooms. Tile flooring is resilient, waterproof, available in a variety of colors and designs, and generally less expensive than other hard surface options.

There’s nothing wrong with using the same flooring throughout your home. There’s nothing wrong with using different floorings. But what you don’t want to do is use two that are almost the same, but not quite.

What’s the easiest flooring to install in a bathroom? Vinyl sheet makes the easiest flooring type to install. Consider luxury vinyl plank for an easy install with a luxury look. Vinyl can last 15 years or more when installed and cared for properly.

When mopping your peel and stick tiles, avoid using harsh chemical cleaners as the ingredients found within them can cause damage to your flooring and lead to premature loosening.

Vinyl – A vinyl peel and stick backsplash is by far the most affordable, and can be quite realistic when proper techniques are used. These tiles are easier to clean than any product featuring real material and can mimic stone and wood or come in a variety of patterns.

The peel n stick tile backsplash is resistant to the heat of stovetops and humidity of bathrooms. Once Smart Tiles have completely adhered to the surface – generally after 48 hours – they are resistant to the humidity of bathrooms and water splash. However, it is highly inadvisable to install them in the shower.

If you stick the tile slightly askew and want to reposition it, it’s not going to be easy and may damage the surface you’re tiling over. While some peel-and-stick tile is made to be removable (like some wallpaper), most are made to stick and stay. This also makes removing tile later more difficult.

Peel and stick tiles are waterproof, as they’re made of multi-layer vinyl that makes them water and moisture-resistant in humid environments. But if water is left on them, it can penetrate the gaps and damage the wall or subfloor.