Baseboard Installation Cost Per Linear Foot Expect to pay between $5.70 and $8.95 per linear foot for baseboard installation. Contractors usually price installation by the linear foot, and these costs include materials and labor. However, you’ll likely pay at least $15 more if you need debris removal.

To measure linear footage, start by measuring the length in inches. Then divide the total inches by 12. The length is the linear footage, so no fancy linear foot calculator is required. To convert linear feet to feet, there’s no math.

Common Lengths in Linear Feet

In terms of measurement, a foot and linear foot are essentially the same. In most instances, the term “foot” refers to a linear foot. A linear foot is equal to 12 inches, or 1 foot.

A linear foot is exactly what it sounds like: a measurement that is 12 inches (one foot) long and extends in a straight (or linear) line.

Installing and painting crown molding costs $4 to $12 per linear foot on average, not including the materials (paint and molding). Materials might add anywhere from $1 to $20 per linear foot, depending on what you go with.

Does crown molding make a room look bigger or smaller? If you use crown molding that is the appropriate width and the same color as or a lighter color than the room, it will generally make the room seem taller and larger. If you match the color of the molding to the walls, it can make a low ceilinged room look taller.

MDF, or medium-density fiberboard, offers another option for inexpensive crown moldings. MDF moldings are made of layers of wood pieces glued together under intense heat and pressure. The result is a lightweight, dense and inexpensive crown molding that can be primed, painted and installed like wood.

Altogether you can expect to pay between $2,000 and $4,000 to add crown molding throughout your home. Naturally, less investment is required if you’re only installing in select rooms or using crown molding to accent cabinets or framing.

The original purpose still holds true: They clean up the space where walls and ceiling meet. “When it’s done right, crown molding helps lift the space, drawing your eye up to make the ceiling feel higher,” says Dixon.

You don’t have to put crown molding in every room to get a good effect. Putting crown molding in main rooms like living rooms, family rooms, dining rooms and kitchens will produce an elegant effect. It’s less important in bedrooms and bathrooms, although it can certainly be used successfully in those areas.

Crown is typically nailed up with a 2” finishing nail and a compressor and finishing gun. Outside corners are usually done with a brad nailer and 1” brad nails with glue. Studs are generally 3-1/2”, drywall a ½” and the crown moulding a minimum of ½”; therefore 2” finishing nails are necessary.

Crown molding is usually nailed to the wall studs along the bottom edge and into the ceiling joists above–a lot of stud-finder work.

Installing it is as simple as buying a box of itty-bitty finishing nails and hammering in the molding. Seriously, you do not even need a nail gun. Here’s the whole step-by-step for how to install baseboards and crown molding—note that most of the work happens in the planning phase.

You can still complete projects without a nail gun. A classic hammer and nails will get the job done if you do not have a nail gun. While nail guns may make the work go faster, you also lose some control over where the nails go. In some situations, you may even be able to use glue instead of nails.

A 16-gauge nailer is capable of firing thicker nails when compared to an 18-gauge nailer. So, it is better suited for jobs that require higher stability and better holding strength. On the other hand, the much thinner brother of the 18-gauge, the 16-gauge, ensures smoother and cleaner work.

Bostitch F21PL

10 Best Nail Guns for Fencing – Reviews 2021

• Metabo HPT NR90AES1 21 Degree Pneumatic Framing Nailer.
• NuMax SFR2190 Pneumatic Framing Nailer.
• BOSTITCH Framing Nailer.
• Freeman PCN65 Pneumatic Coil Siding Nailer.
• Paslode – 501000 PowerMaster Pneumatic Framing Nailer.
• Freeman PFR2190 Pneumatic Framing Nailer.

The velocity decreased with each consecutive shot as the pneumatic nail gun recharged, meaning stopping power would also decrease. The first shot in a series is therefore the most powerful. The guy cites 50 yards as the maximum distance the nail traveled.

While the downside to a brad is its holding power, finish nails are made from heavier 15- or 16-gauge wire, which means they can handle a greater payload. For larger trim, such as baseboards or crown molding, a finish nail is the more suitable choice.