43320 lbs
Q. What is the weight of a Cat 330 excavator?
Caterpillar 330 excavator and 330 GC excavator have operating weights of 68,125 and 67,460 pounds, respectively, with horsepower ratings of 275 and 204, respectively.
Table of Contents
- Q. What is the weight of a Cat 330 excavator?
- Q. How much does a 312 CAT excavator weigh?
- Q. How wide is a 312 CAT excavator?
- Q. What tonne is a Cat 312e?
- Q. How much can a cat 313 lift?
- Q. Can brake fluid be used in place of hydraulic fluid?
- Q. Can you use water as hydraulic fluid?
- Q. Why do we use hydraulic fluid instead of water?
- Q. Why do hydraulic machines use oil instead of water?
Q. How much does a 312 CAT excavator weigh?
33080 lbs
Q. How wide is a 312 CAT excavator?
Caterpillar 312
| Caterpillar crawler excavator | |
|---|---|
| Body width: (mm) | 2550 |
| Track width standard: (mm) | 500 |
| Width over tracks: (tracks 600mm) | 2490 |
| Width over tracks: (tracks 700mm) | 2590 |
Q. What tonne is a Cat 312e?
14 Ton
Q. How much can a cat 313 lift?
Working Ranges & Forces
| Maximum Digging Depth | 19.8 ft 6040 mm |
|---|---|
| Boom | Reach 4.65 m (15’3″) Reach 4.65 m (15’3″) |
| Stick | Reach R3 m (9’8″) Reach R3 m (9’8″) |
| Bucket | GD 0.53 m³ (0.69 yd³) GD 0.53 m³ (0.69 yd³) |
| Maximum Reach at Ground Level | 29.4 ft 8660 mm |
Q. Can brake fluid be used in place of hydraulic fluid?
The main thing is DON’T use brake fluid. Hydraulic fluids are a large group of mineral oils, water-based or water used as the medium in hydraulic systems. Brake fluid is a subtype of hydraulic fluid with high boiling point and low freezing point.
Q. Can you use water as hydraulic fluid?
Water can be used as a hydraulic fluid, but it is not as good a lubricant as oil. Adding some anti-freeze to water helps as it reduces its corrosive effects on aluminium and steels.
Q. Why do we use hydraulic fluid instead of water?
Hydraulic fluid has a higher boiling point than water to help combat this. Related to this is the concept of vapor pressure. Hydraulic systems often involve small orifices, which can cause cavitation (localized boiling).
Q. Why do hydraulic machines use oil instead of water?
And the main reason why we use oils instead of water in hydraulic systems is that the boiling point of water is very low, and hence it may start boiling inside a hydraulic cylinder in case of high temperature applications, and it will initiate corrosion also.
