3 mm (0.3 cm) 4 mm (0.4 cm) 5 mm (0.5 or 1/2 cm) 6 mm (0.6 cm)

25.4 mm

Moderate rain: Greater than 0.5 mm per hour, but less than 4.0 mm per hour. Heavy rain: Greater than 4 mm per hour, but less than 8 mm per hour. Very heavy rain: Greater than 8 mm per hour. Moderate shower: Greater than 2 mm, but less than 10 mm per hour.

Rainfall amount is described as the depth of water reaching the ground, typically in inches or millimeters (25 mm equals one inch). An inch of rain is exactly that, water that is one inch deep. One inch of rainfall equals 4.7 gallons of water per square yard or 22,650 gallons of water per acre!

25.4mm

Millimeters to inches conversion table

SAE to Metric Conversion Chart

1828.80 mm

Conversion table inches to mm

Fractional Inches to Decimal Inches and Metric Millimeters

3/16 (0.1875) inch = 0.4763 centimeter So, 3/16 inch = 3/16 × 2.54 = 0.47625 centimeter.

Whatever You Can Imagine, We Can Produce

40 gauge is usually a reference to the thickness in thousandths of an inch. So, assuming this is the same, . 040″ thick, divided by .

15 U.S. Code § 206. Standard gauge for sheet and plate iron and steel

B&S Gauge to mm & inches Conversion

12-gauge steel is 2.86 times stronger than 14-gauge steel. 11-gauge steel is 1.45 times stronger than 12-gauge steel.

Gauge size standard:

Please take a look at our products page….Fraction-Decimal-Millimeter Conversions.

Fraction, Decimal, and Millimeter Equivalent Measurements

Decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch

Fractional Inches to Decimal Inches

0.375

Multiply a length value taken in millimeters by a conversion factor of 0.03937 to convert that value into inches. For example, if you have a measurement of 92 millimeters, multiply this by 0.03937 to get 3.62 inches.

7.375

7.75

1.5

3.625