When bleach and water are mixed together to create a cleaning or disinfecting solution, the solution is only good for 24 hours. The temperature of the water does not affect the cleaning or disinfecting abilities of the solution. After the 24 hours, the solution begins to lose needed disinfecting properties.

Disinfect water using household bleach, if you can’t boil water. Only use regular, unscented chlorine bleach products that are suitable for disinfection and sanitization as indicated on the label. Double the amount of bleach if the water is cloudy, colored, or very cold. Stir and let stand for 30 minutes.

1/3 cup bleach per 1 gallon of water OR 2 tablespoons bleach per 1 quart water. This will give you a 1000+ ppm disinfecting solution. After cleaning the area with detergent, spray or wipe with surfaces with the disinfectant. Make sure to allow surfaces to fully air dry.

How to mix the bleach solution: 1 ml (1/4 teaspoon) household bleach to 500 ml (2 cups) water, or.

How to Use

1. If the surface is dirty, pre-clean to remove any dirt or grime. Next, mix 1 Tablespoon Clorox® Clean-Up® Cleaner + Bleach per 2 cups water (or 2 Teaspoons per 1 cup water).
2. TIP: Make a fresh solution every time.
3. Apply the solution directly to the surface.
4. Wipe or rinse off the solution and allow to air dry.

The U.S. Environmental Protection Agency (EPA) allows drinking water treatment plants to use chloramine and chlorine to disinfect drinking water. Chlorine is also used up quickly in water systems. Sometimes there is not enough chlorine left to kill germs in the water by the time it reaches the end of the pipes.

1 1/4 cups water. 1/4 cup white vinegar. 1/4 cup (60% + alcohol content) vodka or Everclear (excellent germ-killing properties – you can substitute rubbing alcohol, but it will have a more medicinal scent) 15 drops essential oil – peppermint + lemon OR lavender + lemon are great in this recipe.

How to make a 2000 ppm solution to kill additional organisms

How to make a 1500 ppm solution for general disinfecting

Simply mix bleach and water for an easy disinfectant for non-porous surfaces (check manufacturer’s instruction where applicable). Wash your hands and put on gloves for protection. Then properly dilute the bleach according to the CDC’s ratio: For big jobs: 5 tablespoons (1/3 cup) bleach per gallon of water.

Don’t Apply Your Bleach Solution with a Spray Bottle Even Clorox’s in-house experts say they do not recommend making or using a bleach spray solution at home.

Locate a clean dropper from your medicine cabinet or emergency supply kit.

How to Make Your Own Disinfectant Bleach Solution Supplies and Ingredients. Making a bleach solution to disinfect your home can be easy. Mixing a Bleach Solution. To clean hard surfaces such as plates and countertops, the ratio is 1:80. Use and Expiration. You can wash the surface with soap and hot, clean water before using the bleach solution. A Word From Verywell.

It is common practice to add a small amount of bleach to water to make it potable. The concentration is enough that the water has a slight chlorine (swimming pool) smell and taste and it may lead to a slightly upset stomach, but it should not cause burning or difficulty swallowing.

A gallon of bleach provides 1 part per million (PPM) of chlorine to 60,000 gallons (about 250,000 liters) of water.