Compared to other sidings, vinyl is one of the easiest to install. It cuts easily, can be put up quickly, and requires no painting. Though the installation process is simple, prepping for the job requires more effort. Our expert guide gives you all the info you need to install vinyl siding on your home.

The siding must be installed over a flat surface, so unless you’re siding a new home, or have removed the old lap siding, you’ll need to line the wall with sheets of rigid-foam board, usually 1/2-inch thick. Both the rigid foam and siding can be nailed in place with galvanized shingle nails. Do It Yourself!

Cost to Vinyl Side a House

Sheathing/Backerboard Vinyl siding should be applied over a sheathing that provides a smooth, flat surface. Consult local building codes for sheathing requirements. Vinyl siding must never be applied directly to studs without sheathing.

Vinyl siding is cheap, ranking among one of the least expensive ways to side your home. Many homeowners are happy with the look of vinyl siding. Vinyl’s look is improving, too, with technological advancements in texture and colorfastness. You can also paint it if you want.

Labor costs For materials and labor, homeowners can expect to pay between $2.50 and $10.75 per square foot for vinyl siding. The labor alone typically costs between $1.06 and $2.50 per square foot.

Vinyl siding can be installed over common wood sheathings such as plywood, oriented strand board (OSB), or other materials (e.g., foam plastic insulating sheathing). The thickness of wood sheathing counts toward the total thickness that the fasteners must penetrate into nailable material, usually 1 1/4” (32mm).

The bottom of the starter strip (the part the bottom panel hooks on to) should be at least 1 in. below the top of the foundation, but the lower the vinyl siding is installed, the better. It protects the sheathing from rain, snow and pests.

It’s a good idea for homeowners to install foam insulation under their vinyl siding to protect their homes from water and improve energy efficiency. It is an air barrier.

The answer to that question is yes . Yes, you can put vinyl siding over existing wood siding assuming its condition is still good.

If you live in a wet climate or have seen signs of moisture problems on your home such as mold development on the siding, then insulated vinyl siding could be right for you . It can be very distressing when termites or other pests begin to infiltrate your home from the outside in.

A vinyl siding system consists of various trim pieces, such as J-channels, corner posts, and other trim pieces. All of these are installed first, and then the siding panels themselves are installed.

After you decide on the type, style and color of siding to install, they will provide an exact price for you. The most affordable vinyl siding costs $65-$85 per square. The most commonly-used vinyl sidings are priced at $90-$125 per square. Premium vinyl siding can cost as much as $225 or more per square.

https://www.youtube.com/watch?v=SS1x9ZaouQs