To stop any series from recording automatically,

To set channel locks, press the MENU button on your remote, select LOCKS then choose the locks appropriate for your family. Any channel, including movie channels, pay-per-view and local channels can be locked. The Parental control lock option is simple and easy to use.

It’s easy to select your parental controls with your remote.

1. Press MENU on your remote.
2. Choose Settings or Settings & Help (what you see depends on your receiver).
3. Select Parental Controls and follow the prompts to review or edit your settings.
4. Select Lock Now and enter your DIRECTV parental controls PIN.

1. On your remote control, press the DVR button>>>>select Scheduled.
2. Select any upcoming episode of the series>>>>press OK.
3. Select “Get More Info.”
4. Select “View Series Info.”
5. Select “Cancel Recording.” Then confirm on the next screen.

Customer Can Lock The Channels Through Navigation Button (Left /Right) By Ticking Block. Press Ok To Save The List.

1. Inform customer to Press Menu–> Go to My dishtv–>Go to Parental control->Press OK.
2. Customer will get Block channel option.
3. Default password is 1234 or ask customer to enter pin which he had reset.
4. channel list will appear with Allow/Block option.
5. Press OK to save the list.

How to Disable Parental Locks on the DISH Network

1. Press the “Menu” on your Dish Network box or remote control. Scroll down, select “Locks,” and then press “Select.”
2. Enter the 4-digit password you created when you initially configured the parental controls, highlight “OK,” and then press “Select.”

How to turn off parental controls on an Android device using the Google Play Store

1. Open the Google Play Store app and tap the menu icon, which consists of three stacked lines.
2. Tap “Settings” on the menu, then scroll to and tap “Parental controls.”

Change Passcode

1. Select the SETTINGS icon.
2. Highlight Parental Controls.
3. Enter your current passcode.
4. Select CHANGE PASSCODE.
5. Enter your desired passcode.
6. Re-enter your desired passcode.
7. Select OK to confirm the new passcode was successfully created.

Visit https://app.box.com/reset and enter the email address associated with your Box account. Check your email, you will receive an email with a link to reset your password.

Retuning

1. Switch on your digital box and/or TV.
2. Press Menu on the remote control.
3. Select the Setup or Installation option.
4. Select the ‘First time installation’ option (sometimes called ‘Factory reset’, ‘Full retune’ or ‘Default settings’).
5. Press OK if your equipment asks if you want to delete all your channels.

The message No Signal is displayed on my TV screen after selecting an input. Note: This message may appear after updating your Android TV™ software. Make sure the correct input is selected. This message will appear if you select an input that’s not connected to an active device.

Hold the “VCR/DVD” button while pressing the “On/Standby” button, and the receiver should enter “Standby.” Turn it on again by pressing the “On/Standby” button. Bear in mind that this will clear all the presets and other settings — but it may be those settings that are causing the problems.

… receiver to its factory defaults, while holding down HOME until the remote indicator lights (about 3 seconds). “Clear” will appear on the AV receiver Make sure that resetting the AV receiver will delete your radio presets and custom settings.