How to Reset a Motorola Digital Cable Box

programming the remote:

1. Turn on the device you are programming the remote for (TV, VCR, etc).
2. Press and hold the ‘Function Key’ (TV, CABLE, VCR or AUX) until the four function keys blink twice.
3. Enter the 4-digit code for the desired device.
4. Aim the remote control at the device and press Power once.

What does 8888 mean on cable box? Resolution: All TV Boxes display 8888 at power on. If the front panel displays 8888 for more than 3 seconds, reboot the TV Box by powering it off, unplugging the power cord, plugging it back in and powering it up after the time displays on the LCD screen.

1. Turn off the Motorola set-top box while leaving the TV turned on, then immediately press the “Menu” button on the remote.
2. Press the down arrow on the remote to scroll through the options until you reach the last one called “Restore all defaults.”

Reboot the cable box by unplugging it from the wall outlet. Wait about 20 seconds, then plug it back in. This should cause an automatic reboot which will usually fix most problems, including a frozen picture and features which no longer work. If a reboot doesn’t do the trick, phone your cable company.

Restart your TV box Sometimes all it takes to correct this issue is restarting your TV box. Power off your TV Box. Unplug the power cable from the wall outlet or power bar. Wait 30 seconds, then reconnect the power cable.

Reset Instructions To reset your cable box, simply unplug it from the wall outlet. Wait about 30 seconds, then plug it back in and allow the box to go through the reboot process, which should take about three minutes.

Restart from the Xfinity My Account App. Restart from the Help Menu. Restart Using the Power Button….Restart Using the Power Button

1. Ensure your cables are tightly secured.
2. Press and hold the Power button located on the front of the TV Box for 10 seconds.
3. The TV Box should automatically restart.

Press the Power button on the cable box so it can boot back up. Once you plug the cable box back in, press the main Power button on the front of the machine or on your remote. The lights on the box’s display should turn on or say “Boot” as it starts back up.

If it is a regular box, go ahead and turn it off. Nothing gained at all be leaving it on. If it is a DVR, it is best to leave it on. If it is off and it comes on for a scheduled recording, it will come on with the audio muted.

Without Remote. To turn on your TV without the remote, just walk over to the TV and hit the power button.

Cable Boxes Use an Absurd Amount of Energy, Even When They’re Off. That innocuous little device atop your TV has a surprisingly large carbon footprint. The boxes don’t just consume power when you’re using them; they also suck up energy when they’re turned off.

Your cable box uses almost as much electricity as your refrigerator, so it generates a lot of heat which has to go somewhere. Without enough air flow, your electronics can overheat to the point of permanent damage or fire. Overheating also stifles the efficiency of electronics.

A set-top cable box with a digital recorder can consume as much as 35 watts of power, costing about $8 a month for a typical Southern California consumer. The devices use nearly as much power turned off as they do when they are turned on.

Power Saver is a feature that saves you money by reducing the amount of energy your TV Box uses by automatically powering it down when it’s not in use. You’ll know when your X1 TV Box is powered down because the green/blue/white power light on the front panel of the device will be off.

Note: To reboot your Spectrum cable box manually, disconnect it from the power supply by pressing and holding the power button for 10 seconds. Then wait for 60 seconds before you connect it to power again. The cable box will probably restart.

This may indicate a sleep or power-off timer is set. Scroll down to Timers and verify Sleep Timer and Power-Off Timer are both set to Off. …

Make sure the cable is working properly and is secured well. Gently reinforce the connections of the power and try to switch to a different outlet to rule out faulty wiring. If after all that it still keeps turning off try an update/reset if at all possible.

In most cases, random restarts are caused by a poor quality app. Try uninstalling apps you don’t use. Be sure the apps you do use are reliable, especially the apps that handle email or text messaging. … You may also have an app running in the background that is causing the Android to randomly restart.