When the safety is off, you’ll see a red indicator appear on the safety’s button or slide mechanism. Some rifles and shotguns with a slide safety may also have the letter “F” appear when the gun may be fired and an “S” appear when the safety is on.

If you see a red color dot, your safety is off and your firearm is ready to fire. Located either on the bolt or just behind the bolt handle on the frame of the receiver, a lever safety blocks the firing pin when engaged. In the forward position, the safety is OFF, and the firearm can be fired.

What are the three (3) steps a safe hunter should follow in the treatment of minor cuts and abrasions? Clean the wound with soap and water, apply antibacterial ointment and apply a sterile dressing.

The number one reason nonhunters oppose hunting is because of poor hunter behavior. Hunter’s behavior toward nature is very harsh which makes people worried about the wildlife species. For the conservation of nature, hunting is should be done in a manner so that it does not affect the wildlife and the forest.

The Four R’s of Ethical Hunters 1. Respect for Self  Learn everything you can about the game you are hunting. Know and respect the legal seasons of the game animals being hunted.  Practice marksmanship long before the hunting season to ensure a clean, swift harvest of game animals.

Every time you pick up a firearm, the first thing you do is point the muzzle in a safe direction and check to see if it is loaded. Be sure the chamber and magazine are empty and that the action is open until ready to be fired.

Main Causes of Hunting Incidents

• Hunter Judgment Mistakes, such as mistaking another person for game or not checking the foreground or background before firing.
• Safety Rule Violations, including pointing the muzzle in an unsafe direction and ignoring proper procedures for crossing a fence, obstacle, or difficult terrain.

The most important clothing choices are a daylight fluorescent orange hat and daylight fluorescent orange outerwear—a shirt, vest, or jacket. Daylight fluorescent orange clothing makes it easier for one hunter to spot and recognize another hunter because nothing in nature matches this color.

lever action firearm

Four steps to effective cleaning and disinfecting

1. Cleaning. The first step is to remove all organic material.
2. Washing. This step is the most time-consuming of the entire process, but it is also the most important.
3. Disinfecting — This is a critical step in the cleaning process that requires some use of science.
4. Drying time.

Firearms must be stored unloaded and in a locked location, separate from ammunition. The storage area should be cool, clean, and dry. Storing firearms in closed gun cases or scabbards isn’t recommended because moisture can accumulate. Store guns horizontally, or with the muzzle pointing down.

It is imperative that you keep your firearm clean. Multiple firings cause the powder residue and other grime and gases to build up in the action and on the barrel. Over time, this can affect the performance of your gun, which can become unreliable and unpredictable in terms of performance.

A popular question we often get is if it’s possible to over clean your guns? No but you can damage your gun AND effect its accuracy by cleaning it improperly.

You should ALWAYS clean your gun within a few days of shooting it. You don’t need to clean in 5 minutes after you fire but generally within one week will be fine. Things you need to consider are the type of firearm, the age, and the type of ammo.

Once you’ve finished cleaning, it’s essential to lubricate your handgun. When you use solvents and other chemicals to remove dirt and grime, it can make the metal susceptible to rust. If you forget to re-apply oil and leave the solvent residue, there’s a chance parts of your gun will corrode.

Do not lubricate the bore using gun oil! For long term storage only, the bore can be treated with a heavier lubricant such as Barricade (or equivalent). This must be removed by cleaning the barrel prior to shooting the firearm! Clean the exterior of the barrel, barrel hood, barrel lug, and the feed ramp.

No, you do not have to take a gun completely apart to clean it after shooting it with Black Powder.

Gun parts suffer from corrosion and tension, and you can use WD-40 to minimize the risk of breakage. Do not forget what an aerosol is designed for: to displace water. When your gun is full of moisture, it can be useful to process it with WD-40 before cleaning.

Froglube

The Best Gun Cleaner Solvents & Oils in 2021

• CLP by Sage & Braker.
• Hornady 99901 One Shot Gun Cleaner.
• Hoppe’s No.
• Hoppe’s Elite Foaming Firearm Cleaner.
• Lucas Gun Oil Original & Extreme Duty.
• Hoppe’s Elite Cleaner Spray.
• Ballistol Multi-Purpose Oil.
• Break-Free CLP-2 Cleaner Lubricant Preservative.

From your bathroom, you need a bottle of hydrogen peroxide. That’s it. Two simple, everyday household products that when mixed together in a 50/50 solution will eat away metal deposits in your gun, clean burned particles of metal and gunpowder that stain your gun’s innards, and make the outside portions shine like new.

Hot soapy water is a great gun cleaner. Be sure to dry completely and lube as it removes ALL oils and grease.

1. White vinegar/hydrogen peroxide cleaning solvent. When lead and other metal buildup becomes an issue, mixing up a 50-50 concoction of both white vinegar and hydrogen peroxide will cut right through. I haven’t personally used this mixture to clean guns, but it has a reputation of being the DIY super solvent.

This issue magically resolved when I started using Break Free lubricant mainly because WD40 is not designed to clean your guns. WD40 is a solvent that leaves very little oil on the surface. This means that more dust and dirt will be attracted to the surface and eventually you’ll have a nice layer of gunk on your gun.

Guns very seldom actually need anything designed just for guns–mechanical cleaners and lubricants often work perfectly fine. Also, yes, brake cleaner works amazingly well at cleaning off buildup.

olive oil

carb cleaner, brake cleaner or starter fluid are not enough to clean a gun when used alone.

Brake cleaner is for cleaning brakes, while carburetor cleaner is for cleaning carburetors.

Gunscrubber is similar to brake cleaner. If you have a camo finished gun, I’d recommend that you use the special Gunscrubber version for camo. Otherwise brake cleaner would be OK.

Using CLR will remove any and all bluing left on the rifle. Seeing as Bluing is a form of controlled RUST. Let it soak for 10 to 15 minutes.