Many immobilizer problems can be fixed simply by simply replacing the battery in the key fob. Many transponder keys depend on a small battery to relay the security code to the car immobilizer. Be careful replacing the battery so you don’t accidentally damage the transponder chip inside.

When you insert your key into the ignition switch or bring a Smart Key fob into the vehicle, the key transmits an electronic code to the vehicle. The engine will only start if the code in the transponder chip inside the key or Smart Key fob matches the code in the vehicle’s immobilizer.

You can bypass the immobilizer by placing the key in keyhole hence deactivating the car’s immobilizer to remote start. The added security with Mobokey allows the security to be activated as soon as the phone moves away from the car, so you don’t have to worry about car security.

Hold the key in place for around 30 seconds to let the immobilizer unit know that you have the right key. You can try turning the key on both sides, lock, and unlock. The action will aid you in bypassing the system and deactivate the immobilizer if it recognizes the key.

How do you bypass an immobilizer? Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system.

Attempt a DIY reset by inserting the key in the ignition and turning to the “on” position, without cranking. Leave the key “on” for 10-15 minutes while the ECU reprogRams itself. Then turn the key to the “off” position. Try to start the vehicle.

If the anti-theft system is not working properly then you will have to find a way of shutting off the system so that your car resumes normal operation. If you have a damaged door lock you might need to look into hiring a locksmith in Houston to fix the problem.