Add 1 tablespoon of dish detergent and 1 tablespoon of vinegar . The vinegar is used to kill any bacteria and germs. Allow to sit for one hour or over night. Rinse each brush under running water to remove dirt build up and soap.

Rinse your equipment in clean water to remove any residue before drying. Once salon or spa tools are clean, you should take care to store them in a clean dry covered container or UV cabinet. Cleaning all surfaces regularly will minimise the risk of build-up of bacteria.

To clean, apply alcohol to each of the blades using a cotton ball. Rub a few drops of shear oil at the center of the shears. Do this each night and let them soak until morning. The next day, wipe the blades clean before you use them again.

• ‘ Dry clean.
• Pre-rinse.
• Wash.
• Post-rinse.
• Inspect.
• Sanitize.
• Dry.

Answer: objective of cleaning and sanitizing food contact surfaces is to remove food (nutrients) that bacteria need to grow, and to kill those bacteria that are present. It is important that the clean, sanitized equipment and surfaces drain dry and are stored dry so as to prevent bacteria growth.

Pointers to follow in storing tools and equipment:

1. Have a designated place for each kind of tools.
2. Label the storage cabinet or place correctly for immediate finding.
3. Store them near the point of use.
4. Wash and dry properly before storing.
5. Store knives properly when not in use with sharp edge down.

There are four main types of cleaning agents used in commercial kitchens:

• Detergents.
• Degreasers.
• Abrasives.
• Acids.

LUBRICATE TOOLS Lubricating tools helps them to perform better and reduces wear and tear of its components. This is even more important when it comes to gas and pressurised air tools which need to be lubricated on a daily basis before use.

Answer: Making sure your tools are properly stored, cleaned, and well maintained will save you time and money as well as making your projects and jobs much easier. When it comes to storing your tools you have to work with the space that you have.

The Importance of Farming Tools Farming tools are very important because the crops and livestock will not be raised and cultivate properly if there’s no utensils. Without farming tools, no plants will able to produce crops, which is very important so that we can able to have foods in our table each meal.

Oil: lifeblood of the industrialised nations Oil has become the world’s most important source of energy since the mid-1950s. Its products underpin modern society, mainly supplying energy to power industry, heat homes and provide fuel for vehicles and aeroplanes to carry goods and people all over the world.

Heating oil, also called fuel oil, is used in boilers and furnaces for heating homes and buildings, for industrial heating, and for producing electricity in power plants….What are the petroleum products people consume most?

Petroleum products include transportation fuels, fuel oils for heating and electricity generation, asphalt and road oil, and feedstocks for making the chemicals, plastics, and synthetic materials that are in nearly everything we use.

What are the disadvantages of using crude oil?

• Oil is a non-renewable source of energy.
• Burning oil produces carbon dioxide gas.
• Burning oil can pollute the air.
• Much of our oil has to be imported and it is becoming more and more expensive as reserves reduce and imports increase.

Advantages of Oil Energy

• Oil has High Energy Density.
• Oil is Easily Available.
• Oil is Used in a Variety of Industries.
• Oil is a Constant Power Source.
• Emission of Greenhouse Gases.
• Water Pollution.
• Oil Refining Produces Highly Toxic Substances.

Let’s start by looking at some of the advantages crude oil has.

• Crude Oil is Readily Available.
• Oil Has Lots of Uses.
• It Has a High Energy Density.
• Crude Oil Can Be Stored Easily.
• Oil Energy Can Be Constant.
• The Oil Industry Creates Jobs.
• Oil Energy Produces Toxic Gases.
• Oil Leaks Are Possible.

With rising global demand, highly volatile prices and increasingly stringent environmental regulations, the oil and gas industry faces three major challenges : reduce costs, optimize the performance of its industrial base assets and improve its environmental footprint.

Glide path for oil and gas production. So, as a rough estimate, the numbers suggest a 32% drop in natural gas by 2035 and a 24% drop in crude oil production by 2040. The natural gas drop is based on a federal government goal, which will likely require a carbon-pricing mechanism to succeed.

The oil and gas sector is under greater regulatory scrutiny, with record fines for financial crime-related violations. In the highly regulated upstream industry of exploration and drilling, risks include sanctions violations, bribery, corruption, and environmental crime.