Locate the DIC control panel on the dashboard in front of the driver’s seat under the speedometer. Keep pushing and releasing the “Set” button on the DIC control panel until “ABS” is shown. Hold the “Set” button for about 5 seconds to reset the light and turn it off.

Disconnect the positive cable from the car battery, and then hold down on the brake pedal to drain the car’s electrical system. This will reset the car’s central computer. Plug the positive cable back to restore the power. Even if this doesn’t totally reset the light, it should stay off for up to 1 week.

Resetting Your ABS Dashboard Warning Light Step One: Disconnect the positive cable from your car battery. Then, hold down the brake pedal to drain the vehicle’s electrical system. This will result in a reset of the car’s central computer. Plug the cable back in to restore power.

If your ABS warning light stays on, you need to get your brakes checked immediately….ABS Warning Light – What It Means and Is It Safe?

1. Check the brake-fluid level.
2. Check the footbrake free play.
3. Ensure the handbrake’s released.
4. Get your brakes checked immediately.

The four common reasons that typically cause this light to turn on include a malfunctioning ABS module, low levels in the fluid reservoir, broken wheel speed sensors, or the system is turned off. Your ABS actually shares some important components with another system in your vehicle: your traction control system.

Driving with the ABS Light on is not a good idea because it means your ABS is not working properly. This means your vehicle may not handle like it is designed to under heavy braking. If both your ABS Light and brake system light come on, this is an emergency and you need to stop driving right away.

Is It Safe To Drive With An ABS Light? When your ABS light comes on it doesn’t mean your vehicle isn’t safe to drive from point A to point B. The car will still function as normal, it will start up just fine and drive how it always has and your brakes will work as well.

When your car’s ABS light comes on, it means there is a problem with your vehicle’s braking system. As such, ABS can help drivers safely apply the brakes and steer their cars during an emergency. There is an ABS light on a car dashboard in most vehicles equipped with this braking system.

An anti lock warning light will be in different places in the instrument cluster for each car, and it maybe accompanied by a red warning light.

1. Step 1: Check ABS Fuse.
2. Step 2: Test the ABS Wheel Sensor.
3. Step 3: Replace an ABS Wheel Speed Sensor.
4. Step 4: Replace the ABS Computer Module.
5. Step 5: Checking the Stator Ring.