Locate the RESET button on your Synology NAS. Press and hold down the RESET button for about 4 seconds until you hear a beep. Release the button immediately. Press and hold down the RESET button again for 4 seconds until you hear 3 more beeps.
Q. How do I fix a flashing blue light on my Synology?
Remove all attached external drives. Unplug and replug the power cord, and then boot up the device again. Monitor the LED indicator and check whether it continues to blink for more than 10 minutes.
Table of Contents
- Q. How do I fix a flashing blue light on my Synology?
- Q. How long does it take to restart Synology?
- Q. How do I force shutdown my Synology?
- Q. How do I check memory on Synology?
- Q. How do I turn on Synology?
- Q. How do I reboot my Synology router?
- Q. How do I safely turn off my Synology NAS?
- Q. How long does a Synology memory test take?
- Q. What is Synology memory compression?
Q. How long does it take to restart Synology?
When rebooted, the blue light flashes (as expected) along with the LAN light. Boot takes probably a good 5 or 6 minutes and I can hear the HDD’s working occasionally during that time, but they don’t light up on the NAS. Eventually it’ll beep and the HDD lights will come on.
Q. How do I force shutdown my Synology?
Long press the power button on your Synology NAS for at least three seconds or until you hear a beep sound. The outcomes may be as follows: If the system is working normally: Your Synology NAS will emit a beep sound and successfully shut down the system.
Q. How do I check memory on Synology?
Resolution
- Download and install Synology Assistant (available at Download Center).
- Launch Synology Assistant and click the upper-right. icon.
- Tick the Memory Test checkbox and click OK.
- Select the Synology NAS to run the memory test.
- Follow the wizard to complete the process.
Q. How do I turn on Synology?
1 Use the LAN cable to connect DiskStation to your switch/router/hub. 2 Connect the AC adapter to the power port of DiskStation. Connect one end of the AC power cord to the AC power adapter, and the other to the power outlet. 3 Press the power button to turn on your DiskStation.
Q. How do I reboot my Synology router?
Use a paper clip to gently press and hold the RESET button for 4 seconds. Your Synology Router will then start a soft reset. When the soft reset is complete, launch a web browser on a computer that is being connected to your Synology Router via Ethernet. Enter “router.synology.com” in the address bar.
Q. How do I safely turn off my Synology NAS?
The power button is used to turn Synology DiskStation on or off. To turn off Synology DiskStation, press the power button and hold it until you hear a beep sound and the Power LED starts blinking.
Q. How long does a Synology memory test take?
Note: The Synology memory test typically takes a few hours to complete. Mine took 3 hours and ten minutes. Note: The more RAM, the longer the test will last.
Q. What is Synology memory compression?
In most of the new Synology NAS devices, the “Memory Compression” feature is designed to improve system performance (responsiveness) by storing part of the memory pages in RAM in a compressed form. In some cases, the “Memory Compression” process can use up to 100% CPU and users’ disks starts to increase in RAM size.
