Anyone know how to link a soundbar to the dish remote? assuming you have the 54 remote (it has a house button on the top), hit the house button twice, go to settings, go to remote, go to auxiliary device, select audio accessory, select pairing wizard, and pick samsung from the list on the side.

you want to know the code to put in just do these steps:

1. press and hold the tv button till the all the top buttons turn red.
2. press the # button twice.
3. the tv light will blink out the code to you. It will blink the first number then a pause then blink the 2nd number then a pause then blink the third number.
4. Thats it!

How do I get my volume to work on my Dish remote?

1. Press the MENU button once or the HOME button twice, depending on your remote.
2. Select Settings.
3. Select Remote Control.
4. Select Volume & Mute Buttons.

Programming an Xfinity X1 Remote to Your Soundbar

1. Make the Soundbar the receiver output.
2. Press the Setup button on your Xfinity X1 remote.
3. Wait until the LED light at the top turns green.
4. Enter the Soundbar’s manufacturer code.
5. Wait for the LED light to flash twice (in green)
6. Test the remote.

Use the TV remote to navigate to Settings, select Sound, and then select Sound Output on your Samsung TV. Select your Samsung soundbar, and then select Close. Now you can use your TV remote to adjust volume and mute the soundbar. The soundbar should also turn on and off with the TV.

Syncing Sony Sound Bar With TV Remote

1. Make sure sound bar and TV are connected using HDMI cable.
2. Enable “Control for HDMI” on both your TV and sound bar.
3. Finally, press “Sync Menu” on the TV remote, go to HDMI Device selection, select your sound bar and you are ready to go.

You need to use the soundbar remote, to use the TV remote you would need to use an HDMI soundbar with ARC connections.

Connect an HDMI cable from the HDMI OUT port on your soundbar to your TV’s HDMI (ARC) port. Set the soundbar to D.IN mode by pressing Source on the remote or soundbar. After about 2 seconds, the source will automatically change to TV ARC.

1. When you connect an external device to TV (without ARC) and Sound Bar, connect the HDMI cable (sold separately) from the external device to the TV. Then, connect the external device to the Sound bar using an optical cord (sold separately).
2. If you want to connect to just the TV, then the HDMI connection is unnecessary.

HDMI ARC is designed to reduce the number of cables between your TV and an external Home Theatre System or Soundbar. The audio signal is capable of traveling both ways to and from the speakers, which will improve the sound quality and latency of the signal.

If your TV has problems identifying the HDMI-ARC connection, you can manually set it up by accessing the Settings menu. Enter HDMI control / Expert settings menu and make sure HDMI ARC option is turned on. Once the connection is successful, your TV will channel all the output to the ARC connected sound systems.

There no difference between HDMI and HDMI ARC, the only difference between the HDMI and HDMI ARC are on the receiver side. Make sure the attached device is ARC compatible so that it can work perfectly, if not compatible, then, it won’t work.

To set up HDMI ARC, power on your TV and soundbar.

1. Next, connect one end of an HDMI cable into the HDMI IN (ARC) port on your TV.
2. Connect the other end into the HDMI OUT (TV-ARC) port on your soundbar.
3. Next, change the source on your soundbar to the D.IN.