The default OEM keyless entry code for Your Ford Escape can be found in the back of Your owner’s manual. Depending on the year there may also be a decal that is located above the brake pedal that has the code on it. If You do not have the owner’s manual, or the decal then You will have to contact a Ford dealership.

2001 Ford Escape Key Fob Remote Programming Instructions

1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN.
2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
3. Within 20 seconds, press any button on second keyless remote.
4. Turn ignition to OFF.

Ford Key Fob Programming Instructions

1. Close all doors on your vehicle.
2. Turn the ignition from OFF to RUN 8 times, within 10 seconds.
3. At this point, the door locks will lock and unlock.
4. Within 8 seconds, push any button on your Ford remote to begin programming.

In most cases the key number will be stamped on the front of the lock next to where the key enters. In some cases the number may also be stamped on the original key.

Virtual Key Codes shows the symbolic constant names, hexadecimal values, and keyboard equivalents for the virtual-key codes used by the Microsoft Windows operating system. These codes work in the console window, but not the home window. The codes are listed in numeric order.

A key card is a small plastic card which you can use instead of a key to open a door or barrier, for example in some hotels and car parks. The electronic key card to Julie’s room would not work.

Keycard systems operate by physically moving detainers in the locking mechanism with the insertion of the card, by shining LEDs through a pattern of holes in the card and detecting the result, by swiping or inserting a magnetic stripe card, or in the case of RFID cards, merely being brought into close proximity to a …