Drain the line to the ice maker with clean water and reattach. Grab a bucket and put the water line into the bucket and flush it with straight vinegar. This will kill any bacteria that may be hiding in the water line. Flush each of the lines with plain water a few times to clean.

Mix 1/2 cup of bleach in 1 gallon of water. Dampen a rag in the mixture and wipe down the ice maker inside the freezer. Wipe the unit with a dry rag to remove the moisture. Wash the storage bin with the mixture as well, rinsing it thoroughly.

Related Articles

1. Shut off the water valve that feeds that water-dispenser and ice-maker lines.
2. Remove the ice bin and dump the ice out in the sink.
3. Pour 3 to 4 cups of white distilled vinegar into the ice-maker and dispenser lines with a small funnel and allow it to soak for five to 10 minutes to break down the lime.

Note: Before carrying out any DIY repairs, disconnect your fridge from the electricity supply and switch off the water at the saddle join.

1. Break Up Ice Jams.
2. Align The Ice Cube Fill Valve & Cup.
3. Level The Fridge & Ice Maker.
4. Clear Out The Condensation Drains.
5. Check The Water Lines And Tighten Connections.

Blocked Defrost Drain Inside the freezer compartment, along the bottom back wall, there’s an opening that allows humid air to escape. If this drain gets blocked, whether by a stack of items in the freezer or debris clogging the line, the fridge condenser coils will have to work overtime and start dripping water.

As refrigerator filters remove what contaminants and particles they can, they become clogged with whatever they’ve managed to remove from the water. When refrigerator filters go unchanged, it is common to find E. coli and fecal coliform in your water, bacteria that can cause serious damage to your health.

You should replace your faucet-mounted filter every two to three months, or as recommended by the manufacturer. Keep in mind that busier households and your home’s water quality can decrease the life of a filter.

between three to five gallons