Here are the steps to take for starting the Recovery Console from the F8 boot menu:

A.

1. Run the ASR wizard, which is part of Windows Backup.
2. After you run the ASR Wizard, start Windows Explorer.
3. Navigate to the /%windir%/repair folder (e.g., C:/windows/repair).
4. Copy the asr.
5. On a different networked computer that has a 3.5″ disk drive, copy these files to a 3.5″ disk and label the disk as your ASR disk.

Create recovery disk for Windows Server 2003

1. Insert the CD in the optical drive.
2. Restart your computer.
3. At the Welcome to Setup screen, press R to load Recovery Console.
4. Select the Windows installation you want to access with Recovery console.

1. Restart the computer.
2. After the start-up message appears, press the F8 key.
3. Choose the option Repair Your Computer.
4. Click the Next button.
5. Choose your username.
6. Type your password and click OK.
7. Choose the option Command Prompt.

How to Access Windows RE

1. Select Start, Power, and then press and hold Shift key while clicking Restart.
2. Select Start, Settings, Update and Security, Recovery.
3. At the command prompt, run the Shutdown /r /o command.
4. Use the following steps to boot the System by using a Recovery Media.

To perform system recovery from the BIOS:

1. Enter the BIOS.
2. On the Advanced tab, use the arrow keys to select Special Configuration, and then press Enter.
3. Select Factory Recovery, and then press Enter.
4. Select Enabled, and then press Enter.

Restart your PC, and press the F8 key repeatedly on the keyboard while it starts up and you’ll see the Advanced Boot Options menu, from where you can select Safe Mode, Safe Mode with Networking, or Safe Mode with Command Prompt.

Whatever your issue, here are some troubleshooting steps to take when your computer won’t boot correctly.

1. Give ‘er More Power.
2. Check Your Monitor.
3. Listen for the Message at the Beep.
4. Unplug Unnecessary USB Devices.
5. Reseat the Hardware Inside.
6. Explore the BIOS.
7. Scan for Viruses Using a Live CD.
8. Boot Into Safe Mode.

If you can’t start Windows normally, you may start Safe Mode when your Windows can’t start normally. As known, F8 no longer works in starting Safe Mode. But you can re-activate it with the Boot Configuration Data (BCD) Edit command. With that, you can re-enable F8 boot menu easily.

How to turn on safe mode on an Android device

1. Press and hold the Power button.
2. Tap and hold Power Off.
3. When the Reboot to Safe Mode prompt appears, tap again or tap OK.

Method 5: Disable Automatic Startup Repair In Command Prompt, type bcdedit /set {default} recoveryenabled No and press Enter. Restart your PC, the Automatic Startup Repair should be disabled and you might be able to access Windows 10 again.

Why can’t you access the Safe Mode using F8? On previous versions of Windows such as Windows 7, at the beginning of the boot, you’re able to press the F8 key to access the Advanced Boot Options menu, where you can enable Safe Mode. But on Windows 10, the F8 key doesn’t work any more.

To access the Boot Manager of your system, please press the key combination Ctrl + F8 during the startup process. Select the desired Safe Mode to start your PC.

1. At the Windows desktop, open the Start Menu and click on Settings (The cog icon)
2. Select Update and Security.
3. Select Recovery from the left-hand side menu.
4. Under Advanced Startup click on the Restart Now button on the right-hand side of the screen.
5. The computer will restart and boot to an Options Menu.
6. Click on Troubleshoot.