Dechlorinator works instantly as long as there is a bit of circulation in the bucket or tank, it doesn’t take much. The amount of chlorine added to tap water is enough to assure that any bacteria in the distribution system do not end up in the water at the end of the system, this being your faucet.

I’ve never heard of adding too much. But it shouldn’t be a problem, just follow the directions on the back of any dechlorinator and you’ll be fine. Nothing to worry about, unless you for some reason accidentally spill an entire bottle into the tank.

Generally, fishes like freshwater, and unless you disturb them too much (e.g., vacuum cleaning every other day), they will like this frequent change. Great question @Home. As long as your tap water mimics your tank conditions, you can safely change up to 50% using a dechlorinator.

about 15 minutes

Add water conditioners to the aquarium before refilling with water, it works instantly and will not harm the fish. Neutralizes the chlorine and chloramines typically found in tap water, making it safe for fish.

How long do you let water conditioner sit before adding fish? You should only have to wait 15 minutes or what it says on the packaging.

A water softener will: Remove calcium and magnesium (hardness particles) from your water supply. Reduce or eliminate scale build-up in appliances and pipes. Reduce soap and detergent usage.

Soften the hot water only Use less water and salt by only softening the hot water and leaving the cold water hard. You probably won’t even notice the difference and it will reduce your salt and wastewater by nearly half. It won’t harm your water heater or plumbing.

100% Water Changes PH is the level of acidity (soft water) or alkalinity (hard water—minerals) in the water, and while most ranges are tolerable for fish, fluctuating pH can kill. PH shock will stress and potentially kill fish, especially if their immune system wasn’t up to par to begin with.

You guessed it. It’s water! If you plop your goldfish into tap water without treating tap water for goldfish first, stress could be the least of their problems. In fact, chlorine and heavy metals in the tap water can literally kill your goldfish overnight!

24 hours

To soften hard water, you need to take the mineral out with a natural “water softener” such as Sera Super Peat. Another option is to use demineralized water for your fish tank. The same is true for trying to raise the pH in acidic water that is soft and doesn’t contain much mineral.

You can test the hardness of your aquarium water with strips, also called dip tests. For these tests, you collect a sample of your water in a small receptacle. Never dip strips into the aquarium itself. The strip will change colors based on water hardness.

Methods. The most common means for removing water hardness rely on ion-exchange resin or reverse osmosis. Other approaches include precipitation methods and sequestration by the addition of chelating agents.

Water Softening Filter Cartridges to Remove Hardness for Water. Hard Water contains dissolved minerals in the form of Calcium (Ca), Magnesium (Mg), and Iron (Fe). Removal of these minerals is accomplished by softening the water through an ion exchange process using water softening filter cartridge.

Solved! How to Tell If You Have Hard Water

1. Mineral buildup around faucets is a sign of hard water.
2. If you’re frequently scrubbing soap scum from your shower, hard water could be the cause.
3. Water high in minerals can leave skin feeling dry and itchy.
4. Hard water can leave cloudy spots or film on your glasses.
5. Hard water takes a toll on appliances.

Frequent Washing Yes, washing your hair is damaging. Even just getting hair wet can lead to more breakage! When hair becomes wet, the shaft swells, resulting in hair that is more elastic and easier to break.