It is essential that you deal with damp as quickly as possible to prevent mould from forming; mould spores can be a health hazard especially if you are asthmatic or suffer with allergies. There is no one cure for mould due to the variety and level of severity the mould is and some require professional removal.

Very early signs of damp include tiny black specks on the paintwork or wallpaper, this is actually mould growth. Be sure to look in the corners as these tend to be ‘cold spots’. Peeling wallpaper and cracked or bubbling paint are also potential indicators of condensation.

Keep the thermostat at the same temperature in every room, and if there’s a room in your home that you don’t use often, keep the door closed. You should also try to open the windows in that room for a couple of hours each day to prevent condensation and damp from forming.

Yes, you can. There is no harm in leaving a dehumidifier on overnight as far as your health is concerned. But there are other aspects to it, like, noise factor, auto shut off, etc.

Removing all mold spores from your home is nearly impossible. Mold stays “dormant” in the air or on surfaces even when there’s no excess moisture to help it grow. So, to answer your question, dehumidifiers do NOT kill mold, but they do prevent it by reducing humidity.

Here are a few quick and simple remedies for preventing and banishing damp.

1. Wipe down windows and sills every morning. Image credit: Debi Treloar.
2. Deal with steam from cooking.
3. Get rid of bathroom moisture.
4. Ventilation.
5. Keep your house warm.
6. Insulate.
7. Buy a dehumidifier.
8. Don’t hang clothes to dry inside.

Run your exhaust fans whenever you have to cook or take a shower to keep that excess moisture out.

1. Use a Dehumidifier.
2. Grow Plants that Absorb Humidity.
3. Don’t Boil Water on Especially Humid Days.
4. Dry Your Clothes.
5. Clean Your AC Filters.
6. Take Colder and Shorter Showers.
7. Replace Your Carpet.

White vinegar is a mildly acidic product that cleans, deodorizes, and disinfects. It can also kill 82% of mold species, including black mold, on porous and non-porous surfaces. You can use it safely on most surfaces, and its offensive odor goes away quickly. Pour undiluted white vinegar into a spray bottle.

Vinegar truly is better than bleach at killing mold. In most cases, “a background level of mold spores will remain” after the application of bleach. “Bleach only kills surface mold, not the membrane underneath,” according to ServiceMaster. “That means the mold will grow back.

In such cases, a solution of diluted bleach provides the fastest way to kill mold on walls or flooring. Prepare the solution by adding one cup of bleach into a bucket that contains about a gallon of warm water. Then proceed to scrub the mold vigorously with a stiff-bristled brush you’ve dipped in the bleach solution.

To clean these fragile materials, the Organic Consumers Association suggests using rubbing alcohol or vodka with water. To clean mold with vinegar, just spray it on the moldy surface and leave it.

You can use denatured, vodka, rubbing, or isopropyl alcohol. Moreover, alcohol in itself dries up quickly and works against molds that love moisture. Using alcohol to clean surfaces won’t “kill” black molds, but it helps remove traces of it on areas where you don’t want to use bleach or other harsh chemicals.

Lysol Effectiveness Lysol makes a mold and mildew remover that contains bleach. This solution will kill both mold and mildew upon contact.

Wash mold off hard surfaces with soap and water, or use a mix of vinegar and hydrogen peroxide to kill mold. When cleaning mold, always wear a filtered facemask, so you won’t inhale spores. Disinfect surfaces by spraying them with vinegar, followed by a spray of 3% peroxide. Wipe clean.

1. The first step to getting rid of mold involves scrubbing the affected area with soap and water to clean up most of the mold. Use a detergent or soap, like Dawn dish soap. Vacuum the area thoroughly to catch any remaining mold spores.

Natural Ways To Get Rid of Mold and Mildew Vinegar: Spray undiluted white or apple cider vinegar on the mold and let it sit for an hour. Afterwards, wipe the mold. There is not reason to wash it off, as this will create more moisture.

Salty water kills single-cell organisms such as mold spores by dehydrating them. But you must keep the area around the organisms wet, paradoxically, for the dehydration process to proceed. This works best on small food and clothing items that you can wrap with a cloth saturated with saltwater.

Lemon juices helps break down and remove mold. Mold and mildew become problems for many homeowners, especially in the humid, damp environment of the bathroom. Lemon juice helps kill and remove molds from surfaces.

How to Stop Mold from Coming Back

1. Stop steam from going off in the house.
2. Keep your home heated even when you’re outside to stop condensation from forming on your walls.
3. Ventilate properly.
4. Keep everything dry.
5. Clean the fabrics and shower curtains regularly.

Vinegar is a really effective way at cleaning mould naturally. While bleach simply bleaches the mould white, vinegar works to kill the mould spore, and if used regularly can even prevent the mould and mildew from coming back.