markers, so that the number on the mile marker is the same as the number of the Interstate exit or interchange. Exit 40 will be at or very close to Mile 40. This is a real aid to navigation and trip planning. For example, if your destination is Exit 50, you know it’s only 10 miles away.

The exit numbers are being changed by MassDOT to comply with federal highway mandates, which require mile-based exit signs. Massachusetts is one of three states that have not yet begun any sort of conversion to the mileage-based system. It will soon be Exit 133 on the Massachusetts Turnpike instead of Exit 22.

Section 2E. 14 Size and Style of Letters and Signs

In the field of road transport, an interchange is a road junction that uses grade separation, and typically one or more ramps, to permit traffic on at least one highway to pass through the junction without interruption from other crossing traffic streams.

The purpose of recreation and cultural interest area signs such as RS-121 Jet Ski/Personal Watercraft Signs is to guide road users to a general area and then to specific facilities or activities within the area.

Low Clearance. Yellow Diamond, two opposite arrows, 12’6″, tells the maximum height for transportation. Stop Sign Ahead. Yellow Diamond, black up arrow, red octagon, warns you about a stop sign ahead.

A yield sign calls on the driver to do the following: Slow down, defer to oncoming or intersecting traffic, stop when necessary, proceed when safe, and remain aware of oncoming vehicles. A flashing yellow light has the same meaning as a yield sign.

A left-turn yellow arrow means that the protected turning period is ending. You can no longer make a protected left turn at the intersection. California has a permissive yellow signal law, which means that the law does not require you to stop when a yellow signal is displayed even if such a stop can be made safely.

Solid Yellow–A yellow traffic signal light means “CAUTION.” The red traffic signal light is about to appear. When you see the yellow traffic signal light, stop if you can do so safely.

Pedestrian Crossing & Crosswalk Sign A pedestrian crossing sign provides advance notice of pedestrian activity, so drivers can slow down or stop ahead of time. The flashing crosswalk lights and LED-illuminated crosswalk light keep pedestrians in plain view.

Two Direction Arrow Traffic Sign Yield the right-of-way or stop before turning right or left. You cannot travel straight through the intersection and must turn either right or left.

2. Arrow Compass Tattoo. The arrow and the compass are both associated with a direction, and the combination of these two images makes for a powerful tattoo. It is a piece that represents a new chapter in the wearer’s life and a shift in focus. If you decide on this design, it is an incredibly positive piece.

The dip sign is a warning sign. Dip signs indicate that there is a dip or low place in the road. It’s hazardous to encounter this sharp depression in the road while driving at a high speed. Use additional caution after rain as these dips can fill with water and cause cars to hydroplane.

You will see the Divided Highway Ends sign before the end of a physically divided highway. It warns you that the highway ahead is no longer divided by a median or barrier. Very soon you will enter an undivided roadway with two-way traffic.

Divided highway” means that you are approaching a divided section of highway where there is some type of physical barrier between you and the opposing lane of traffic. These signs are meant to alert drivers to prepare for a physical division in the highway.

What are the colors of a sign which tells you the distance to the next exit of a highway? Green with white letters.

The keep right sign is a regulatory sign. Keep right signs are used in locations where the driver must pass only on the right of a roadway feature or obstruction. The sign will be posted ahead of the obstacle, in order to warn the driver of a traffic island, obstruction or median ahead.

The no left turn sign is a regulatory sign. Regulation signs with a red circle and slash indicate that you are prohibited from taking the designated action. Usually found at intersections, stop signs, yield signs, or other locations where drivers intend to make a left turn.

The pennant-shaped yellow and black traffic sign marks the beginning of an area where you may not pass other vehicles. (a “no passing” zone). Passing areas are based on how far a driver can see ahead.

You may pass on the right only when: An open highway is clearly marked for two or more lanes of travel in your direction. The driver ahead of you is turning left and you do not drive off the roadway to pass. Never pass on the left if the driver is signaling a left turn.