Apple products, such as your iPhone, iPad and laptop, are dual voltage, therefore you do not need a converter to use your Apple device anywhere in the world. You can tell if you if your electronic device is dual voltage by looking on the voltage rating on the device.

Answer: A: Answer: A: The iPad charger works on 110 or 220 volts.

5.1 volts

If the appliance is connected to a 220V power supply, the power can be doubled at the moment the appliance is turned on. The protection part will be damaged if it is accompanied by smoke and flash.

You can’t run a 240 volt appliance on 110 volts because it simply won’t receive enough power to operate properly and you can’t run a 110 volt appliance on 240 volts because it will burn up..

Step Down Voltage Converter Transformer 220 Volts to 110 Volt. High-quality 220v to 110v Step-down transformers and Voltage converters come with a 5 Year warranty. A Stepdown converter reduces the incoming 220 240 Volt electricity found in most parts of the world to 110 Volts USA power.

Originally Answered: Electrical Engineering: Which is more efficient to use 220v or 110v? Your electric bill is based on kilowatt hours. A kilowatt hour (KWh) cost the same regardless of voltage so there is no difference in cost between 110 VAC or 220 VAC.

If the cord has “250V” printed on it and your mains power is between 220V-240V, then go ahead and plug it in. You won’t have any problems as long as the 250V power cable fits into your 220V-240V wall power outlet and into the amplifier.

Nothing will happens while connecting 230V supply to 250V cable When ever we connect the 250V supply to 230V cable then there is no any reactions because the cable is considered with respective to current it not completely depend on voltage.

The voltage listed is the maximum rated voltage that should be applied to it. Therefore, it’s normally possible and safe to plug a 240v into a 250v receptacle.

What will happen if I plug a 250v cord, into a 220-240v amplifier? If you live in a country where the mains provide 220 – 240 V the amplifier will work provided in how much power (Amps) the cord can handle. If it is a 10 A 250V power cord and you amp requires more than 10 amps the cord may heat up and destroy itself.

The difference between 230V and 220V is to small to matter. Just do it and don’t worry about it. Yes, of course. 230 Volts in the US is “nominal”, which means it can vary, sometimes more than 5% (12 Volts), so the fridge may be operating on 220 Volts here in the US without you realizing it.

In North America, the terms 220V, 230V, and 240V all refer to the same system voltage level. With electrical loads, the voltage will drop, hence the common reference to voltages below 120 and 240, such as 110, 115, 220, and 230.

It means the electrical supply is 230V and it means the frequency is 50 Hz.. . . . This is the standard Mains supply used around most of the World.. . .